Teradek 10-0306 Cube 306 PoE HD-SDI Decoder 10/100 USB

Ships from manufacturer
Calculated at Checkout
Manufacturer Part Number:
  • Teradek 10-0306 Cube 306 PoE HD-SDI Decoder 10/100 USB

What's in the Box

  • Teradek Cube 306 HD-SDI Decoder
  • 10" SDI BNC to BNC Cable
  • 2-Pin Connector to AC Adapter 6' Cable with International Plugs
  • Ethernet Cable
  • USB Stick with TeraCentral Desktop Software
  • Hot Shoe Adapter with Thumbscrew
  • Teradek 1 Year Warranty

The Cube 306 is a video decoder that outputs high definition video via HD-SDI for use with video switchers and professional monitors. This device decodes IP video from Teradek encoders via Ethernet and includes many of the same great features of the original Cube such as a compact aluminum chassis and low power requirements. This device can also be powered over Ethernet (PoE).

Video Outputs:HD-SDI, SD-SDI: BNC
Bonding:Requires Bond Module for Encoders
Supported Resolutions:1080p 23.98/24/25/29.97/30
1080i 50/59.94/60
1080PsF 23/24/25/29/30
720p 50/59.94/60
Video Compression:H.264, Baseline, Main and High Profile
Supported Video Bitrate:250 Kbps to 10 Mbps
Test Pattern Generator Support:No
Video Format Conversion Support:Built in Video Scaler and Deinterlacer
Color Correction:No
Network Protocols:TCP/IP, UDP, HTTP, DHCP, NTP, SSL, IGMP
Supported Video Transport Protocols:RTP/RTSP: Unicast/TCP, Unicast/UDP, Multicast/UDP streams
MPEG Transport Stream: Unicast/TCP(pushedin from an external source, or pulled down from a remote server such as Core), Unicast/UDP, Multicast/UDP
Teradek Streaming : Unicast/UDP, Multicast/UDP
Remote Control:Teradek Core
Audio Compression:AAC-LC, MPEG Layer 2
Audio Input:Embedded Audio Input
Analog Line or Mic in, adjustable gain
Audio:Headphone output, adjustable volume
Configuration Interfaces:OLED Display with joystick Navigation buttons
Feature-rich WebUI for configuration and control
Switches:On/Off and Reset Switch
Recording Storage:SD Card: Micro
USB Interface Functionality:Powered USB 2.0 host port
USB:USB 3G/4G Modem support
RF Channel Selection:No
Power Input:2 Pin Connector Power Input
Power Over thernet
Nominal Power Consumption:3W (while Charging: up to 10W)
Auxiliary Power Input:6-28V DC
Construction:Milled Aluminum
Dimensions (W x D x H):2.5 x 3.5 x .9" (63.50 x 88.90 x 22.86mm)
Weight:8 oz (226.80g)