Sound Devices MixPre-10T 10-input Recorder with Built-in Timecode

Sound Devices MixPre-10T Front Face of Unit On

Sound Devices

$1,799.00
SKU:
SOU-MixPre-10T
Availability:
In Stock
Shipping:
Calculated at Checkout

Buy Now, Pay Later. Financing now available with Klarna.
Available on orders $149 and up.* Learn More

View Detail

What's in the Box

  • Sound Devices MixPre-10T
  • MX-8AA Battery Sled (Batteries not included)
  • Limited 2-Year Warranty

Due to manufacturer's restrictions this item cannot be shipped outside of the United States.

The MixPre-10T is the newest member of the groundbreaking MixPre Series of recorders, mixers, and USB audio interfaces. This lightweight, 10-input/12-track recorder offers world-class sound quality, flexible powering, and built-in, highly accurate timecode generator/reader – perfect for production sound mixers, field recordists and sound designers.

Exceptional Audio Quality

The MixPre-10T features eight Sound Devices' Kashmir™ microphone preamps. These high-performance, ultra-low-noise, discrete, Class-A mic preamps were handcrafted by Sound Devices. The Kashmir mic preamps feature a -130dBV noise floor, analog limiters, and new 32-bit A-to-D converters to ensure the highest quality audio recordings that far surpass those of other recorders using simple off-the-shelf, IC-based mic preamps.

Accurate Timecode Generator/Reader Plus Wordclock

As its name suggests, the MixPre-10T features a built-in, ultra-high accuracy timecode generator and reader. Even when turned off or all power is removed, the MixPre-10T continues to hold accurate timecode for hours, more than long enough even for the most extended lunch break (or break in production)!

With its BNC, Aux, and HDMI timecode connections, all common frame rates and timecode modes are supported as well as the ability to lock to or output wordclock, ideal for synchronization in any digital audio environment.

Flexible Powerin

For the ultimate in portability and convenience, the MixPre-10T has multiple powering options. The MixPre-10T features locking 4-pin Hirose connector (10-18V) for either external battery powering or AC-powering (with optional AC adapter).

Like the MixPre-3 & MixPre-6, the MixPre-10T can also be powered from AA batteries in a convenient detachable sled of eight cells, or via an optional sled that offers powering from up to two hot-swappable Sony L-Mount Li-Ion batteries.

Versatile I/O Routing

The MixPre-10T offers eight XLR/TRS combo Mic/Line level inputs, and a 3.5mm Aux/Mic input, which can also be used for 2-channel line input, camera return or timecode.

The MixPre-10T also provides comprehensive routing flexibility with its two TA3 balanced outputs and a 3.5mm Stereo output, each with routing matrix.

Auto Copy

The MixPre-10T’s auto copy feature is as easy as ABC - or what we like to call “Auto-Background Copying”. With this feature, users can record files up to 192kHz / 24-bit to an SD card, while automatically copying to a USB thumbdrive (USB A) for handoff to a client or as a backup copy.

Compact, Unintimidating Design

The size and weight of the MixPre-10T will fit any production environment. It features a responsive capacitive touch screen for incredibly simple and intuitive operation, and a bright, IPS sunlight-readable color LCD for the ultimate in convenient navigation. The MixPre-10T also provides a transport joystick for starting record or playback, and two user-programmable shortcuts allowing user customization.

Like all Sound Devices products, the MixPre-10T is extremely durable. Constructed with a die-cast aluminum chassis, it is both lightweight and incredibly robust. The ultra-compact MixPre-10T is perfect for jobs on the run.

Mixing, Metering and Monitoring

The MixPre-10T incorporates a simple mixer that offers gain control knobs, and access to panning and soloing via a simple press of the knob.

For metering, it provides easy-to-read ring LEDs with limiter activity, along with three LCD views for multitrack, mix, and USB return metering.

The MixPre also includes a 3.5mm jack for headphone monitoring with user-programmable routing presets from our custom-designed, powerful, wide-bandwidth headphone amp.

Flexible Wireless Control and Workflow

The MixPre features integrated Bluetooth Smart® for easy wireless connection, control and metering via the free Sound Devices Wingman app on iOS and Android devices.

What’s more, the MixPre-10T allows users to manage and create sound reports, and via Wingman, email those reports directly from a mobile device.

Intuitive Operation

Like its MixPre Series predecessors, the MixPre-10T’s user-friendly, touch-screen navigation features three modes of operation: Basic, Advanced, and Custom. Basic mode has been designed to allow a user to start recording right out of the box, and is intended for stereo recording applications, such as interviews and music recordings.

Advanced and Custom mode offer more experienced audio users access to multi-channel recording and advanced settings such as metering, routing, timecode, mic pre gain, stereo and M/S channel linking, channel phase invert, input/output delay, headphone presets, and more.

Powerful USB Audio Interface

The versatile MixPre-10T makes an excellent USB audio interface featuring 12 channels in and 4 channels out from a computer at up to 96k sample rate. The Mixpre-10T also features the unique ability to record to an SD card while simultaneously audio streaming via USB.

Frequency Response 10Hz to 80kHz +/- 0.5dB re 1kHz @ 192kHz sample rate
THD + Noise 0.005% max (@1kHz, 22-22kHz BW, gain=20dB, -10dBu in)
ADC 32 bit precision; 120dB dynamic range min (A-weighted, gain=10dB, fader=0dB)
Equivalent Input Noise -130dBV (-128dBu) max (A-weighting, gain=76dB, 150 ohm source impedance)
Inputs Mic: XLR active-balanced; 4k input Z
Line: XLR active-balanced; 4k input Z
Aux/Mic in: 3.5mm TRS, 2-channel unbalanced; 100k input Z
Line: ¼-inch TRS active-balanced; 4k input Z
USB Audio: 4 channels
Gain Mic input: +6dB to +76dB
Line input: -20dB to +30dB
Fader: -inf to +20dB
Headphone: -inf to +20dB
Total, Mic-to-recording (max): +96dB
Aux In (Mic): Gain = +10dB to +40dB
Aux In (Line): Gain = -10dB to +20dB
Total Aux Gain including Fader (Mic-to-recording): +60dB
Maximum Input Level Mic XLR: +14dBu (limiters on or off)
Line XLR/¼-inch: +28dBu (limiters on or off)
Aux In (Mic): -10dBu
Aux In (Line): +10dBu
Low Cut Filters 40Hz to 160Hz (adjustable), 18 dB/oct. First stage analog,
subsequent stages digital.
Microphone Powering Mic XLRs: 48V via 6.8k resistors, 10mA each
Mic 3.5mm: 3V @ 3k source Z
Limiters Limiter at all gain stages, range > 40dB. First stage analog, subsequent stages digital.
DAC feeding Stereo Out, Headphone Out 32 bit precision; 115dB dynamic range (A-weighted)
L/R Out TA3 2-channel balanced, 1.1K max output impedance, +7.8dBu max output level
X1/X2 Out 3.5mm TRS stereo unbalanced, 500 ohm output Z, +7.8dBu max output level
Headphones Out 3.5mm TRS stereo unbalanced, for use with any impedance headphones
USB Audio Interface (USB-C): 12-in/4-out; 44.1 to 96 kHz; 16/24-bit; Class-compliant
USB 2.0 high speed or ASIO (supplied)
Mass Storage (USB-C): USB 2.0 high speed
Keyboard (USB-A): Text entry and control
Maximum Record Tracks 12 Tracks: Stereo mix + 10 ISOs
Sampling Frequency
44.1 kHz
47.952 kHz
48 kHz
48.048 kHz
96 kHz
192 kHz
Bit Depth 16, 24
Recording Storage Type: SD, SDXC, SDHC Card
Max Storage Size: 512 GB (SDXC)
Card format: FAT32 (32GB or less) or exFAT (>32GB)
File Type WAV (Broadcast Wave File Format) with embedded timecode stamp and metadata Timecode Modes
Free Run
Time of Day (file stamped w/current ToD)
Rec Run
Ext LTC (file stamped w/incoming LTC on BNC or Aux 3.5mm)
HDMI TC (file stamped w/incoming TC from cameras that output TC over HDMI
Timecode Frame Rates:
Auto-detects (fps): 23.98 (same as 23.976)
24
25
29.97DF
29.97ND
30
30DF
Sync Source Internal, Word Clock, Ext LTC"
BNC In (TC In) "Timecode: 20k ohm impedance, 0.3 V - 3.0 V p-p (–17 dBu - +3 dBu)
Word Clock: 10k ohm impedance, 1.5V p-p
BNC Out (TC Out) "Timecode: 1k ohm impedance, 3.0V p-p (+12 dBu)
Word Clock: 75 ohm impedance, 5V p-p"
Remote Control "Bluetooth Smart: Wireless control using Wingman app
HDMI (micro): Auto-record start/stop trigger from cameras that output record flag over HDMI
Timecode: Auto-record start/stop trigger via Aux In timecode
Touch Screen 320x240; 1.6-inch, color, sunlight-viewable IPS LCD"
Power "AA Batteries: 8x AA sled (included). NiMH recommended
L-Mount: Optional sled for 2x (hot-swappable) Li-ion batteries
AC Adapter: XL-WPH3: Universal, 45 W in-line AC-to-DC power supply Hirose 4-pin DC plug, with detachable IEC power cord. 100-240, 50/60Hz"
Environmental "Operating: -20°C to 60°C, 0 to 90% relative humidity; (non-condensing)
Storage: -40°C to 85°C"
Dimensions and Weight "Dimensions: 36 mm x 206 mm x 175 mm (H x W x D); 1.375” x 8.125” x 6.875”
Weight: .91 kg; 32.1 oz. (unpackaged, without batteries)"
Shipping

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

DVeStore does not pay import fees for international shipments.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

You can view the UPS Shipping Map below to estimate delivery time for your UPS Ground package.

UPS Shipping Map

Fraud Prevention

At DveStore we work diligently to protect the safety and security of our customers and our assets.
All orders are at our discretion to be checked for fraudulent activity on varying levels of research. If we are unable to verify your payment through the information you have provided, we will communicate what is needed for us to move forward with the order process. Additional information, including but not limited to, a photo ID, passport and/or payment details may be requested. Orders processed with Paypal secure payment system will never be asked for credit card information. Should you choose to check out with Paypal, we ask that you reference or use the email address which your Paypal account is linked to.

DveStore’s integrity to communicate with our customers holds true in our payment processing procedures. Questions or concerns are always welcomed.

Returns

Call: 1 (360) 653-7063
Email: order@dvestore.com

Refund Policy

All products carry a 100% satisfaction guarantee. If you are not satisfied for any reason, you may return the product for your money back less shipping charges, within 30 days of the original purchase. If the product has been used, a 15% re-stock fee may apply at our discretion.

To return an item for a refund, first call or email us to receive an RMA number. Please package item in all original packaging from the manufacturer, including any manuals, warranty cards and etc. (Missing these items will automatically subject the item to the 15% restocking fee) Please ship the item back with the RMA # written on the outside of the package: please do not write on or place stickers/labels on the original manufacturer's packaging.

Videos Hide Videos Show Videos

Customers Also Viewed

Top