Sennheiser TeamConnect Ceiling US Ceiling Mic System

$16,995.95 $15,995.95
(You save $1,000.00)
SKU:
SEN-TeamConnect Ceiling US
Availability:
Ships from manufacturer
Shipping:
Calculated at Checkout
Manufacturer Part Number:
TeamConnect Ceiling US
reverb_sync:
off
  • Sennheiser TeamConnect Ceiling US Ceiling mic system

Due to manufacturer's restrictions this item cannot be shipped outside of the United States.

What's in the Box

  • Sennheiser TeamConnect Ceiling Microphone Conference System
  • SL Ceiling Microphone
  • 2 x SL Loudspeaker 52 A W Active Conference Loudspeaker
  • Power Supply and US Power Supply Cord
  • Cable Set (33' Audio-, Power- and Control Cables)
  • Ceiling Suspension Kit
  • Limited 2-Year Warranty

TThe TeamConnect Ceiling from Sennheiser is a conference system with 29 Sennheiser KE 10-237 pre-polarized condenser microphone capsules, and it blends into any conference room infrastructure. Featuring beamforming technology that automatically focuses on whoever is speaking in the room, the conference system can be installed in or on any ceiling, while the central unit is hidden away in a cabinet and the loudspeakers are mounted freely in the room.

The ceiling microphone covers 197 square feet and can be easily expanded for larger groups with additional ceiling mics. After initial installation, the system requires little to no additional maintenance. As a result, conference tables remain free from cables and do not require using a fixed table for your clients.

Furthermore, the system has an RJ-45 network socket for connecting a computer for configuration purposes. There are sockets, buttons, and LEDs located behind a service hatch and a reset button for performing a restart of the microphone. In addition, the central unit has an automatic mixer with eight mic/line inputs each with phantom power, a telephone interface, an Ethernet port, an RS-232 control port, and a USB 2.0 port. Two extra line inputs and eight audio outputs are also featured.

Finally, the active loudspeaker is optimized for speech intelligibility and the frequency levels are adjustable to obtain optimum sound quality, which depends on the mounting position of the speaker and the room characteristics. Up to eight loudspeakers can be connected to the central unit.

  • Array-microphone of 29 omnidirectional microphone capsules allows the person speaking to move around freely anywhere in the room during conferences and presentations
  • Coverage of 197 square feet and extendable with additional ceiling mics
  • Automatic Speaker Focus identifies the position of the current speaker within the room
  • Homogenous volume for optimum speech differentiation
  • Status indication via LEDs
  • Invisible cabling in/at the ceiling
  • Unified communications compatible USB and jack plug
  • SL Ceiling Microphone

    Audio:Sockets: 2 x 3-pin terminals (fits Phoenix Contact MCVW 1.5-3-ST-3.81)
    Power Socket:4-pin terminal (fits Phoenix Contact MCVW 1.5-3-ST-3.81)
    Control Sockets:6-pin terminal (fits Phoenix Contact MCVW 1.5-3-ST-3.81)
    Supply Voltage:20 to 28 VDC
    Power Consumption:20 W
    Temperature:Operation: 32 to 104°F (0 to 40°C)
    Storage: 14 to 140°F (-10 to 60°C)
    Relative Humidity:20 to 95%, non-condensing
    Microphone Type:Pre-polarized condenser microphone
    Sensitivity:-1 dBV/Pa (930 mV/Pa)
    Equivalent Noise Level:20 dBA
    Microphones:29 KE 10-237 microphone capsules
    Pick-up Pattern:Beam pattern
    Maximum Sound Pressure Level (SPL):119 dB
    Dynamic Range:99 dBA
    Dimensions (L x W x H):23.2 x 23.2 x 1.7" (590 x 590 x 43 mm)
    Weight:13.2 lb (6 kg)

    SL TeamConnect CU1

    Mic/Line Inputs:1 to 8 Impedance: 10 kOhms balanced
    Maximum Level:-65 dBu to +17 dBu
    Phantom Power:24 VDC at 10 mA
    Line Inputs:1 & 2 Impedance: 10 kOhms balanced
    Line Outputs:1-8 Impedance: 50 ohms
    Nominal Level:0 dBu
    Maximum Level:17 dBu
    Dimensions (W x H x D):17 x 7.5 x 2" (432 x 191 x 51 mm)
    Weight:4.5 lb (2.25 kg)

    SL TeamConnect CB1

    Frequency Response:40 to 3,300 Hz THD
    Noise:< 0.04 % re-max level with 0 dB gain at 1 kHz
    Dynamic Range:> 84 dB (non A-weighted)
    Dimensions (W x H x D):4.7 x 5.6 x 1.7" (119 x 143 x 44 mm)
    Weight:1.51 lb (0.75 kg)

    Loudseapker

    Frequency Response ± 3dB:53 Hz to 30 kHz
    Maximum Sound Pressure Level (SPL):At 1 m (150 Hz to 5 kHz): 97 dB SPL
    Total Harmonic Distortion (THD):At 90 dB SP: at 1 m> 200 Hz: <1 %
    Input Impedance:Balanced > 10 kOhms
    Unbalanced > 10 kOhms
    Power Consumption:Standby: 110 VAC; 0.34 W / 230 VAC; 0.47 W
    Idle: 110 VAC; 4.53 W / 230 VAC; 4.75 W
    Maximum: 110 VAC; 91 W / 230 VAC; 95 W
    Mounting Profile:2 x M6 on rear panel with depth of 0.39" (10 mm)
    Dimensions (W x H x D):9.5 x 5.5 x 6.3" (240 x 140 x 161 mm)
    Weight:6.8 lb (3.1 kg)