Sennheiser MKH8020STEREOSET Microphone set, each (2) MKHC 8020, MZX 8000, MZW 8000 MZQ 8000

$2,999.00 $2,399.95
(You save $599.05)
SKU:
SEN-MKH8020STEREOSET
UPC:
615104131446
Condition:
New
Availability:
Ships from manufacturer
Shipping:
Calculated at Checkout
Manufacturer Part Number:
MKH8020STEREOSET
reverb_sync:
off
  • Sennheiser MKH8020STEREOSET Microphone set, each (2) MKHC 8020, MZX 8000, MZW 8000 and MZQ 8000 in transport case
  • Sennheiser MKH8020STEREOSET Microphone set, each (2) MKHC 8020, MZX 8000, MZW 8000 and MZQ 8000 in transport case
  • Sennheiser MKH8020STEREOSET Microphone set, each (2) MKHC 8020, MZX 8000, MZW 8000 and MZQ 8000 in transport case
  • Sennheiser MKH8020STEREOSET Microphone set, each (2) MKHC 8020, MZX 8000, MZW 8000 and MZQ 8000 in transport case

Due to manufacturer's restrictions this item cannot be shipped outside of the United States.

What's in the Box

  • Sennheiser MKH8020 Compact Omnidirectional Condenser Microphone Stereo Set
  • XLR Module MZX 8000
  • Microphone Clip MZQ 8000
  • Windshield MZW 8000
  • User Manual
  • Aluminum Transport Case
  • Sennheiser 2 Year Warranty

The Sennheiser MKH8020 Compact Omnidirectional Condenser Microphone Stereo Set is ideal for recording large and small sound sources, for a "Decca Tree" or for use in an OSS "Jecklin Disk" array. As it does not suffer from a proximity effect, it is also a good choice for close-miking. If the acoustic ambiance is right, this microphone will provide very impressive recordings. The extra octave at the bottom end makes the MKH 8020 perfect for recording pipe organs, grand piano and acoustic double-bass.

Sennheiser MKH8020 Features:

  • Onmi-directional pick-up pattern
  • Modular design
  • Wide frequency response 10 to 60.000 Hz
  • Symmetrical transducer with 2 backplates providing extremely low distortion
  • Extremely low inherent self-noise
  • Accurate directional pattern
  • Non reflective Nextel coating
  • Ideal for stereo and surround recordings, as an M microphone and for ambience
  • Transducer principle (Microphone):RF condenser microphone
    Polar Pattern:Omnidirectional
    Frequency response:10 Hz - 60 kHz
    Audio output:XLR-3M balanced, transformerless, floating
    Sensitivity:31 mV/Pa (- 30 dBV/Pa) (in free field, no load (1kHz))
    Nominal impedance:25 Ohm
    Min. terminating impedance:1000 Ohm
    Phantom powering:48 V +/- 4 V
    Equivalent noise level:10 dB(A)
    Equivalent noise level (CCIR 468-3):21 dB (weighted as per CCIR 468-3)
    Maximum sound pressure level (passive):138 dB SPL
    Current consumption:3.3 mA
    Dimensions (Dia.xL):19x74mm / 0.74x2.91"
    Without XLR module: 19x41mm / 0.74x1.61"
    Weight:55g / 1.94oz
    Without XLR module: 25g / 0.88oz