Due to manufacturer's restrictions this item cannot be shipped outside of the United States.
What's in the Box
- Sennheiser MKE 2-4 GOLD-C Omnidirectional Lavalier Condenser Mic - Beige
- 1 Year Warranty
The Sennheiser MKE 2 is a professional miniature lavalier microphone and an industry favorite among field audio engineers, broadcast engineers and film crews. With a wide frequency and high sensitivity response, the MKE 2 lavalier is developed for crucial audio reproduction of vocals and instruments. Its omnidirectional polar pattern provides an even frequency response throughout the perimeter of the microphone.
The result minimizes handling noise caused by clothing, while providing accurate, transparent audio fidelity without noise. The MKE 2 is widely favored for its superior audio quality and miniature profile. The sub-miniature yet durable design enables the microphone to be used in stage performances, video shoots, film shoots, or anywhere an unobtrusive microphone is necessary. The microphone features various terminations to accommodate wireless transmitters and connectors.
Gold Series
Gold series models are designed for broadcast and theater application. A reduced sensitivity (6.3mV / PA) enables high SPL and lower distortion. Additional sweat protection resists moisture from perspiration and moisture.
Omnidirectional Polar Pattern
Omnidirectional Polar Pattern
The omnidirectional polar pattern provides a consistent frequency response at the direct and off-axis sections of the capsule.
Wide Frequency Response
The MKE2 features a wide, linear frequency response for accurate, transparent reproduction of vocals and instruments.
Subminiature Profile
The MKE2's sub-miniature profile enables the microphone to be used on stage or on camera while remaining inconspicuous.
Transducer: | Condenser |
Polar Pattern: | Omnidirectional |
Frequency Response: | Microphone: 20Hz - 20kHz |
Dynamic Range(Typical): | 103dB |
Signal-to-Noise Ratio: | Equivalent Noise Level |
A-weighted (DIN IEC 651): | 27dB |
CCIR-weighted (CCIR 468-3): | 38dB |
Maximum Input Sound Level: | 130dB, (@ 1kHz) |
Power Requirements: | Phantom 12-48V |
Output Impedance: | Nominal Impedance: 50 Ohms |
Min. Terminating Impedance: | 1000 Ohms |
Output Connectors: | 3-pin Lemo Connector for 3000 & 5000 Series Wireless |
Pad: | None |
Low Frequency Roll-Off: | No |
Dimensions: | 0.15" (4mm) Microphone Diameter |
Weight: | 1 gram (0.035 oz) |