null

Sennheiser HMD 300 XQ-2 Headset with Boom Microphone & Cable with XLR and 1/4" Jacks

$369.95 $299.95
(You save $70.00)
SKU:
SEN-HMD 300 XQ-2
UPC:
615104272200
Availability:
Out of Stock
Shipping:
Free Shipping within Contiguous 48 States*
Manufacturer Part Number:
HMD 300 XQ-2
Availability Details:
BACKORDERED - Order now and we will ship once more arrive! NOTE: Payment is charged when order ships. Extended backorders may require DVE Store to reach out to reconfirm payment information once ready to ship.
  • Sennheiser HMD 300 XQ-2 Headset with Boom Microphone & Cable with XLR and 1/4" Jacks
  • Sennheiser HMD 300 XQ-2 Headset with Boom Microphone & Cable with XLR and 1/4" Jacks
  • Sennheiser HMD 300 XQ-2 Headset with Boom Microphone & Cable with XLR and 1/4" Jacks
  • Sennheiser HMD 300 XQ-2 Headset with Boom Microphone & Cable with XLR and 1/4" Jacks
  • Sennheiser HMD 300 XQ-2 Headset with Boom Microphone & Cable with XLR and 1/4" Jacks
  • Sennheiser HMD 300 XQ-2 Headset with Boom Microphone & Cable with XLR and 1/4" Jacks
  • Sennheiser HMD 300 XQ-2 Headset with Boom Microphone & Cable with XLR and 1/4" Jacks
  • Sennheiser HMD 300 XQ-2 Headset with Boom Microphone & Cable with XLR and 1/4" Jacks

What's in the Box

  • Sennheiser HMD 300 Pro Headset with Boom Microphone (Without Cable)
    • Wind and Pop Screen
    • Limited 2-Year Warranty
  • Sennheiser Cable-II-X3K1-Gold Straight Cable with XLR & 1/4" Connectors for HMD Headsets (6.6')
    • Limited 2-Year Warranty

The Sennheiser HMD 300 XQ-2 is comprised of the HMD 300 Pro communications headset and the Cable-II-X3K1-Gold headset cable. The headset's closed-back, over-ear design provides up to 32 dB of passive noise attenuation while the padded headband and earcups ensure comfortable wearing. The detachable 6.6' straight cable features a coiled section to mitigate handling noise. It utilizes copper wiring and is terminated with gold-plated XLR 3-pin and 1/4" jacks.

Sennheiser HMD 300 Pro Headset with Boom Microphone (Without Cable)

The Sennheiser HMD 300 PRO is a closed-back, circumaural communications headset with a sonic design based on the HD 250 linear headphones, giving you a detailed, linear response. The headset features a comfortable construction with split-headband padding to remove pressure from sensitive areas of the head.

With a frequency response of 60 Hz to 25 kHz, the headphones provide clear reproduction of audio, doing so while offering up to 32 dB of passive noise reduction. The headset offers a dynamic boom microphone, one that delivers a hypercardioid polar pattern for focusing on vocals, and a frequency range centered around picking up the human voice in communication settings (80 Hz to 16 kHz). You can adjust the gain of the microphone in 5 dB steps over a range of 45 dB in total.

The headband supporting the unit's earcups is rugged, bendable, and twistable, and the boom can be worn on either side of the headset. To preserve your hearing, the headset features a switchable noise-protection mode called ActiveGard that protects against sudden bursts of sound without interrupting the signal.

The HMD 300 Pro sports a modular cable design to accommodate multiple pin-outs and configurations. Though no cable is included with the headset, each of the compatible cables sport a design that minimizes handling noise; this is achieved with a small series of coils on the cable approach that decouple the cable from the headset.

ActiveGard Technology

  • This sound compression system consists of an electrical circuit incorporated into analogue headsets.
  • Compression technology removes the energy from an excessive incoming signal transmitted through the communication system, leaving the signal free of distortion.
  • The ActiveGard circuit can be compared to an automatic and fast-working “intelligent” volume control. If an incoming signal rises to a level that is harmful to your hearing, it is instantly “turned down” to a lower, more comfortable level.
  • When the incoming signal returns to safe levels, ActiveGard reverts to its stand-by surveillance mode and volume is restored to its original level.

Key Features at a Glance

  • Switchable ActiveGard mode for hearing protection
  • Linear sound reproduction optimized for speech intelligibility
  • Microphone can be worn either on right or left side
  • Comfortable padding design allows for extended use in long wearing sessions
  • Passive ambient noise attenuation due to closed earcup construction
  • Foldable earcup design


Sennheiser Cable-II-X3K1-Gold Straight Cable with XLR & 1/4" Connectors for HMD Headsets (6.6')

The 6.6' Sennheiser Cable-II-X3K1-Gold is a straight copper cable with XLR and 1/4" connectors designed for use with select Sennheiser HMD and HME headsets in broadcast and communications applications. With a proprietary connector at the headset end and XLR 3-pin and 1/4" jacks at the other, it is compatible with HMD 300/301 Pro, HMD/HME 26-II, and HMD/HME 27 Pro headsets.

It utilizes copper wire and gold-plated contacts to enhance conductivity while maintaining a flexible shield. A coiled section reduces handling noise and the aramid reinforcement delivers increased durability.

  • Compatible with HMD 300 Pro, HMD 301 Pro, HMD 26-II, HME 26-II, HMD 27 Pro, and HME 27 Pro headsets
  • Straight copper cable with coiled segment to eliminate structure-born noise
  • Reinforced with aramid for improved durability
  • Softer shield enhances flexibility

 

Sennheiser HMD 300 Pro Headset With Boom Microphone (Without Cable) Specs

Headphone

Driver Type Dynamic
Design Over-Ear (Circumaural)
Earcup Style Closed-Back

General

Frequency Response 60 Hz to 25 kHz
Sensitivity 108 dB at 1 kHz
Impedance 64 Ohms
Maximum Sound Pressure Level (SPL) 123 dB at 1 kHz
Maximum Power Handling 500 mW
Active Noise Cancellation No
Noise Attenuation Up to 32 dB
Foldable Yes
Contact Pressure 6.0 N

Microphone

Type Dynamic
Pickup Pattern Cardioid (Unidirectional)
Frequency Response 80 Hz to 16 kHz
Impedance 300 Ohms
Cable Design Single-Sided
Cable Color Black
Detachable Yes
In-Line Remote/Microphone No

Packaging

Package Weight 1.105 lb
Box Dimensions (LxWxH) 9.6 x 7.55 x 3.35"

Sennheiser Cable-II-X3K1-Gold Straight Cable With XLR & 1/4" Connectors For HMD Headsets (6.6') Specs

 

Compatible Headsets HMD 300/301 Pro
HMD/HME 26-II
HMD/HME 27 Pro
Construction Material Copper cable
Aramid reinforcement
Gold-plated contacts
Connector 1 Proprietary connector with attachment screws
Connector 2 XLR 3-pin male
Connector 3 1/4" TRS male
Cable Length 6.6' / 2 m
Weight 3.7 oz / 106 g
Package Weight 0.25 lb
Box Dimensions (LxWxH) 9 x 5.5 x 0.5"