Do you want the best sound with your Sennheiser Evolution G2 or G3 wireless system? Step-up to better sonic performance and clarity with the Sanken COS11-D. Here at the DVeStore, we buy the COS-11D in bulk with "pig tail" ends (no connector), then special wire the units with the Sennheiser locking 3.5mm for use with the popular line of Sennheiser G2 and G3 wireless. By buying in bulk and batch custom wiring, we're able to save $ and pass the savings on to you!
Because we're shooters ourselves, we know what its like when you want to hardwire a mic instead of risking wireless dropout or RF interference. We believe that every Sanken COS11-D wired for 3.5mm should also be able to be used via XLR when the need arrises. So here we bundle the 3.5mm to XLR Sennheiser MZA-900P XLR adapter. This unit converts 48V phantom power down to 2V.
General Description
The MZA 900 P phantom power adaptor is used to connect pre-polarized condenser microphones with a 3.5mm jack plug to microphone inputs with 10 – 52 V phantom powering (P12 – P48). The connected microphone is supplied via the adaptor.
The phantom power adaptor is available in two different versions:
MZA 900 P with lockable 3.5 mm jack socket (as evolution wireless)
MZA 900 P-4 with lockable 3-pin special socket
The adaptor is also a quick and flexible solution if a microphone is to be used for both wired and wireless applications. One and the same microphone can be used together with the MZA 900 P(-4) for wired applications (e.g. in the studio) or with a transmitter of the evolution series for wireless applications.
The MZA 900 P can also be used as a cable tester for XLR microphone cables.
Features
- Robust metall chassis
- Switchable gain (0/-12dB)
- Switchable roll-off filter (125 Hz (–3 dB), 12 dB/oct)
- Two-colour control LED (phantom power, audio peak)
- Input 3,5mm stereo jack socket, lockable
- Output XLR-3M
Delivery Includes
- MZA 900 P with belt clip
- Instructions for use
- Warranty certificate
Directivity | Omni directional |
---|---|
Transducer | Self-polarized condenser |
Frequency range | 50Hz - 20kHz |
Sensitivity (nominal at 1kHz) |
17.8mV/Pa (-35dB,0dB=1V/Pa) |
Equivalent noise level (A-weighted) |
28dB-A |
Max SPL (1% THD) | 127dB SPL. |
Output impedance at 1KHz |
180 ohms |
Powering | +48±4V phantom |
Current consumption | less than 2mA |
Weight | 82g |
Dimensions | 16.1mm X 4.0mm (diameter), 3.0m(cable length) |
What's in the Box
Sanken COS-11D lav with 3.5mm connector
Case
Metal Windscreen
Tie clip
Rubber mount