RODE VideoMic with Rycote Lyre Suspension Mount
- In Stock
- Free Shipping
What's in the Box:
- RODE VideoMic Directional On-camera Microphone
- Rycote Lyre Suspension Mount
- RODE Windscreen
- 10 Year Manufacturers Warranty with Product Registration
The RODE VideoMic on-camera shotgun mic with Rycote Lyre suspension system is the choice microphone for thousands of video creators.
RODE partnered up and innovated the new VideoMic complete with the Rycote Lyre suspension system in response to the original videomic's user feedback. The Lyre shockmount has been well regarded across the industry as best in class. While the previous VideoMic relied on a series of bands to hold and isolate the mic, the new version offers a much stronger and solid innovative design. No more worrying about replacing silicon bands!
Combining a battle tested clean sounding capsule with the new shockmount allows HDSLR shooters to attain broadcast quality audio. While the shoemount allows the RODE VideoMic to quickly attach to most any camcorder or DSLR, where the VideoMic really shines is when threaded via the 3/8" socket to a boompole and placed closely to the subject.
The RØDE VideoMic is a professional grade 1/2" condenser shotgun microphone designed for use with consumer video cameras and personal audio recorders.
The integrated Rycote® Lyre® based shock mounting system isolates the VideoMic capsule and electronics from its all-metal shoe mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
Its standard sized shoe mount also includes a 3/8" thread in the base for easy mounting on a boom pole or stand.
By employing a super-cardioid polar pattern the VideoMic becomes highly directional, focusing on the subject in front of the camera, and minimising any surrounding sounds.
In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
A -10dB and -20dB level attenuation (or PAD), selectable from inside the battery compartment, allows recording of loud sound sources, such as live music or motorsport.
The RØDE VideoMic directional on-camera microphone is designed in Australia and covered by RØDE Microphones' industry leading 10 year warranty.
Featuring a tight pickup area that focuses on your subject and reduces other surrouing noise, the RODE VideoMic is designed for simplicity of operation so you don't need to be an expert to get professional results.
Its integrated Lyre suspension by Rycote acts to isolate the microphone from knocks and bumps that could otherwise interfere with your sound. With a High-Pass Filter to minimize distracting low frequencies, and a three stage PAD to allow the recording of loud sound sources, the VideoMic is everything you need to record crystal clear audio to match the high definition video of today's cameras.
- Studio recording quality
- Condenser microphone
- Super-cardioid polar pattern
- 9V battery power
- Integrated Rycote® Lyre® shock mounting
- Two step High Pass Filter (Flat/80Hz)
- Three step PAD (0, -10, -20dB)
- Rugged reinforced ABS construction
- Windshield included
- 3.5mm mini-jack output
- Integrated cold-shoe mount (3/8” thread)
- 10 year extended warranty when you register your microphone
|Acoustic Principle||Line Gradient|
|Active Electronics||JFET impedance converter|
|Frequency Range||40Hz - 20kHz|
|Maximum SPL||134dB SPL (@ 1kHz, 1% THD into 1KΩ load)|
|Sensitivity||-38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz||Equivalent Noise Level (A-weighted)||20dB-A|
|Dimensions||65mmH x 102mmW x 250mmD|
|Warranty||1 year with free extension to 10 years following registration with manufacturer|
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
DVeStore does not pay import fees for international shipments.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
You can view the UPS Shipping Map below to estimate delivery time for your UPS Ground package.
At DveStore we work diligently to protect the safety and security of our customers and our assets.
All orders are at our discretion to be checked for fraudulent activity on varying levels of research. If we are unable to verify your payment through the information you have provided, we will communicate what is needed for us to move forward with the order process. Additional information, including but not limited to, a photo ID, passport and/or payment details may be requested. Orders processed with Paypal secure payment system will never be asked for credit card information. Should you choose to check out with Paypal, we ask that you reference or use the email address which your Paypal account is linked to.
DveStore’s integrity to communicate with our customers holds true in our payment processing procedures. Questions or concerns are always welcomed.Returns
Call: 1 (360) 653-7063
All products carry a 100% satisfaction guarantee. If you are not satisfied for any reason, you may return the product for your money back less shipping charges, within 30 days of the original purchase. If the product has been used, a 15% re-stock fee may apply at our discretion.
To return an item for a refund, first call or email us to receive an RMA number. Please package item in all original packaging from the manufacturer, including any manuals, warranty cards and etc. (Missing these items will automatically subject the item to the 15% restocking fee) Please ship the item back with the RMA # written on the outside of the package: please do not write on or place stickers/labels on the original manufacturer's packaging.