Current Top Sellers
DVe Store Educates
Our mission is to help our customers create better video.
We hire industry professionals so when you contact us for assistance, you will be talking with fellow creators!
What's in the Box
- RODE VideoMic Pro
- Rycote Lyre Suspension Mount
- 1 year with free extension to 10 years following registration with manufacturer
Originally released in 2010, the VideoMic Pro quickly became an industry standard on-camera shotgun microphone for professionals and enthusiasts alike. With its small form factor, superior audio quality and industry first +20db level boost, it was the perfect companion for DSLR cameras as they became the go-to device for high definition video capture.
Determined to raise the bar again in 2015, RØDE’s all new VideoMic Pro features the acclaimed Rycote Lyre suspension system, along with an upgraded microphone capsule, improving both the physical characteristics and audio performance of the microphone.
Already implemented on the VideoMic and VideoMic GO, the Rycote Lyre suspension system is widely regarded as the best microphone shock mounting solution available. Featuring a suspension structure composed of a hard-wearing thermoplastic, it is far more effective at minimizing unwanted vibrations, handling and cable-borne noise than traditional elastic suspensions. Virtually indestructible, the Rycote Lyre will never sag, snap, wear out or require rethreading to maintain its effectiveness.
Completing the upgrade is an all-new microphone capsule, giving the 2015 VideoMic Pro even higher sensitivity and lower self-noise, ensuring crystal clear audio capture over a wider dynamic range.
“The VideoMic Pro was a revelation for DSLR users the world over, making broadcast quality audio accessible to everyone at an affordable price” comments Damien Wilson, RØDE’s Global Sales and Marketing Director. “Now we’re taking it to another level. With the Rycote Lyre upgrade, and an upgraded capsule, it’s now even better value for such an amazing broadcast quality product.”
- Rycote® Lyre® shock mounting onboard
- All new capsule with lower noise and higher sensitivity
- Broadcast recording quality condenser microphone
- Compact form factor (150mm/6” length)
- Ultra lightweight (85g/3oz)
- 9V battery powered - over 70 hours use (alkaline)
- Integrated shock mounting
- Integrated foam windscreen
- 3.5mm stereo mini-jack output (dual mono)
- Two step High Pass Filter (flat, 80Hz)
- Three position level control (-10dB, 0, +20dB)
- Camera shoe mount with 3/8” thread for easy boompole mounting
- 10 year warranty with online registration at www.rodemic.com/warranty
The RØDE VideoMic Pro is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio.
At the heart of the VideoMic Pro is an all-new 1/2" condenser capsule that provides broadcast-quality audio via a 3.5mm minijack connector (outputting the mono signal to both left and right channels) with an incredibly low self-noise of just 14db. A super-cardioid polar pattern ensures that surrounding audio is minimised, and your recording is focused on the subject in front of the camera.
The integrated Rycote® Lyre® based shock mounting system separates the VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
Easily accessible on the rear face of the microphone are the power, filter and level controls. In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
Below these controls are the level settings, which attenuate or boost the recorded level as required. The -10dB level attenuation (or PAD) is ideal for recording loud sound sources, such as live music, motorsport, or interviews where the subject is very close to the camera. The +20dB level boost is designed for use with DSLR cameras, allowing the user to reduce the camera's preamp level (or mic-input level), effectively reducing the amount of noise generated by the camera's comparatively low quality audio circuitry.
The microphone uses a standard sized shoe mount for on camera use, and features a 3/8" thread in the base of the mount for easy boom pole mounting.
The VideoMic pro is battery powered, and provides over 70 hours recording from a single 9V battery.
The RØDE VideoMic is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
|Acoustic Principle||Line Gradient|
|Active Electronics||JFET impedance converter|
|Frequency Range||40Hz - 20kHz(selected HPF @80)|
|Maximum SPL||134dB SPL (@ 1kHz, 1% THD into 1KΩ load)|
|Maximum Output Level||6.9mV|
|Sensitivity||-32.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz|
|Equivalent Noise Level (A-weighted)||14dB-A|
|Dimensions||100mmH x 75mmW x 170mmD|
|Warranty||1 year with free extension to 2 years following registration with manufacturer|
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
DVeStore does not pay import fees for international shipments.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
You can view the UPS Shipping Map below to estimate delivery time for your UPS Ground package.
At DveStore we work diligently to protect the safety and security of our customers and our assets.
All orders are at our discretion to be checked for fraudulent activity on varying levels of research. If we are unable to verify your payment through the information you have provided, we will communicate what is needed for us to move forward with the order process. Additional information, including but not limited to, a photo ID, passport and/or payment details may be requested. Orders processed with Paypal secure payment system will never be asked for credit card information. Should you choose to check out with Paypal, we ask that you reference or use the email address which your Paypal account is linked to.
DveStore’s integrity to communicate with our customers holds true in our payment processing procedures. Questions or concerns are always welcomed.Returns
Call: 1 (360) 653-7063
All products carry a 100% satisfaction guarantee. If you are not satisfied for any reason, you may return the product for your money back less shipping charges, within 30 days of the original purchase. If the product has been used, a 15% re-stock fee may apply at our discretion.
To return an item for a refund, first call or email us to receive an RMA number. Please package item in all original packaging from the manufacturer, including any manuals, warranty cards and etc. (Missing these items will automatically subject the item to the 15% restocking fee) Please ship the item back with the RMA # written on the outside of the package: please do not write on or place stickers/labels on the original manufacturer's packaging.