What's in the Box
- RODE Stereo VideoMic X Broadcast-grade stereo on-camera microphone
- RODE SC2 3.5mm TRS patch cable
- Pop Shield
- Wind Shield
- 10 Year Manufacturers Warranty with Product Registration
RØDE's original VideoMic founded the on-camera microphone category, and now the Stereo VideoMic X takes it to an entirely new level.
Using components shared with RØDE's very finest studio recording microphones, the SVMX sets a new standard in immersive audio for camera systems.
By employing Rycote® Onboard suspension at a capsule-level, the SVMX protects your audio from vibration and handling noise without compromising durability.
For the very first time on any RØDE microphone the SVMX features integrated digital switching, allowing you to easily select any of the numerous in-built filters and settings with the confidence of LED indicators.
The Stereo VideoMic X is the ultimate broadcast-grade stereo microphone for on-camera use. Utilising all-metal construction, it is incredibly robust making it ideal for regular professional use, while also providing high levels of resistance to RF interference.
The mic features a matched pair of ½” true-condenser capsules, configured in a stacked X-Y configuration, providing a highly-immersive soundscape. Each capsule is supported by the Rycote® Lyre® shock-mounting system, providing isolation from vibration as well as knocks and bumps.
Digital switching on the rear of the SVMX allows the user to control the level adjustment (-10dB or +20dB), high-pass filter (0/75/150Hz) and an innovative high-frequency boost (+6dB @ XHz) designed to boost the intelligibility of dialogue.
In a first for the VideoMic range, professional-grade balanced outputs are available on the side of the body, in addition to the RF shielded 3.5mm stereo output cable.
An outer dome structure provides physical protection for the sensitive capsules, while reducing wind noise in the same manner as RØDE’s RedDot-winning Blimp.
ACOUSTICALLY MATCHED TRUE CONDENSER CAPSULES
An acoustically matched pair of 1/2" externally polarised, true condenser capsules provide studio-quality, immersive stereo sound.
RYCOTE® LYRE ONBOARD SHOCK MOUNTING
Integrated single-piece thermoplastic shock mounting, designed to minimise handling noise at a capsule-level.
HEAVY-DUTY, LIGHTWEIGHT ALUMINIUM CONSTRUCTION
Robust metal construction that only weighs 300g (10oz).
9V OR PHANTOM POWER (P48)
The Stereo VideoMic X can be powered by 9V battery (up to 30 hours), or via P48 phantom power using XLR connectivity.
BALANCED PROFESSIONAL XLR OUTPUT
In addition to standard 3.5mm stereo output, the Stereo VideoMic X provides balanced output via the professional XLR standard (via miniXLR - not included).
HIGH FREQUENCY BOOST
An innovative setting that will allow the Stereo VideoMic X to enhance its high-frequency sensitivity when using the included wind shield.
HIGH PASS FILTER
Three stage high-pass filter at 0/75/150Hz, to cut out any unwanted low frequency audio such as traffic noise and air conditioners.
Three stage level adjustment, offering a -10dB PAD for recording loud sound sources and a +20dB level boost to provide a cleaner audio signal to your camera/recording device.
INCLUDED POP SHIELD AND WIND SHIELD
High quality environmental protection for both indoors and outside.
|Acoustic Principle||Pressure Gradient|
|Active Electronics||JFET impedance converter|
|Frequency Range||40Hz - 20kHz|
|Maximum SPL||143dB SPL (@ 1kHz, 1% THD into 1KΩ load)|
|Sensitivity||-32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz|
|Equivalent Noise Level (A-weighted)||12dB-A|
|Dimensions||102mmH x 118mmW x 100mmD|
|Warranty||1 year with free extension to 10 years following registration with manufacturer|