Rode Stereo VideoMic Pro with Rycote Lyre Suspension Mount
- ROD-Stereo VideoMic Pro-R
- Ships from manufacturer within 3-7 days
- Calculated at Checkout
What's in the Box
- RODE Stereo VideoMic Pro
- Rycote Lyre Suspension Mount
- Metal Camera Shoe Mount with 3/8" Thread
- Foam Windscreen
- 1 year with free extension to 10 years following registration with manufacturer
The new Stereo VideoMic Pro provides a high quality stereo option for videographers, and is ideal for recording music, and the atmospheric ambience essential in building a realistic audio scene.
Based around the all new capsule with its matched pair of high sensitivity ½”cardioid condensers in a coincident XY pair, the Stereo VideoMic Pro provides a wide stereo image with natural depth.
Another new addition is the integrated Rycote® Lyre® based shock mounting system, which separates the Stereo VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
The Stereo VideoMic Pro, with its ergonomic form factor, make it perfectly suited to DSLR, consumer camcorders and large-sensor video cameras. The newly designed Kevlar reinforced braided cable, as well as the improved foam windscreen, provides excellent acoustic decoupling from the camera and offers significantly lower noise transference and higher sensitivity.
The user friendly designed rear of the microphone body features the power and equalisation controls, including a high pass filter at 75Hz which is designed to cut out the noise generated by air conditioning, traffic and other undesirable low frequency interference.
A -10dB PAD allows the user to reduce the sensitivity of the microphone, making it suitable for recording loud sound sources such as live music or at sporting events.
Like the VideoMic Pro, the Stereo VideoMic Pro features a +20dB level boost specifically designed to provide a higher quality signal with DSLR cameras. When activated, the typically low quality camera preamp level can be reduced, resulting in a lower noise floor and much clearer recording.
The Stereo VideoMic Pro Rycote from Rode builds on the success of the Stereo VideoMic Pro with a few improved upgrades such as a Rycote Lyre shockmount, higher-sensitivity X/Y capsules, denser foam windscreen, better RF shielding, and a thicker Kevlar braided cable. The microphone retains all of the switch locations and other features as the previous model, for use as an on-camera DSLR and camcorder microphone for video applications.
The integrated Rycote Lyre shockmount system protects against handling noise. The Stereo VideoMic features a high-pass filter switch at 75 Hz for minimizing low-frequency noise, and a -10 dB pad for maximizing headroom on behalf of capturing loud signals without distortion. The +20 dB level-boost switch is specifically designed to provide a higher-quality signal with DSLR cameras. When activated, the camera preamp level is reduced, resulting in a lower noise floor and a much clearer recording.
- Broadcast-recording-quality on-camera microphone
- Matched pair, 1/2" condenser capsules in X/Y stereo configuration
- Ultra-lightweight, compact form factor
- Two-step high-pass filter (flat, 75 Hz)
- Three-position level control (-10, 0, +20 dB)
- 9V-battery-powered - over 100 hours of use (alkaline)
- Integrated Rycote Lyre shockmount
- Denser foam windscreen
- 1/8" (3.5mm) stereo mini-jack output
- Billeted metal camera shoe mount with 3/8" thread for easy boompole mounting
|Active Electronics||JFET impedance converter|
|Frequency Range||40Hz - 20kHz|
|Maximum SPL||134dB SPL (@ 1kHz, 1% THD into 1KΩ load)|
|Sensitivity||-38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz|
|Equivalent Noise Level (A-weighted)||18dB-A|
|Dimensions||134mmH x 80mmW x 115mmD|
|Warranty||1 year with free extension to 10 years following registration with manufacturer|
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
DVeStore does not pay import fees for international shipments.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
You can view the UPS Shipping Map below to estimate delivery time for your UPS Ground package.
At DveStore we work diligently to protect the safety and security of our customers and our assets.
All orders are at our discretion to be checked for fraudulent activity on varying levels of research. If we are unable to verify your payment through the information you have provided, we will communicate what is needed for us to move forward with the order process. Additional information, including but not limited to, a photo ID, passport and/or payment details may be requested. Orders processed with Paypal secure payment system will never be asked for credit card information. Should you choose to check out with Paypal, we ask that you reference or use the email address which your Paypal account is linked to.
DveStore’s integrity to communicate with our customers holds true in our payment processing procedures. Questions or concerns are always welcomed.Returns
Call: 1 (360) 653-7063
All products carry a 100% satisfaction guarantee. If you are not satisfied for any reason, you may return the product for your money back less shipping charges, within 30 days of the original purchase. If the product has been used, a 15% re-stock fee may apply at our discretion.
To return an item for a refund, first call or email us to receive an RMA number. Please package item in all original packaging from the manufacturer, including any manuals, warranty cards and etc. (Missing these items will automatically subject the item to the 15% restocking fee) Please ship the item back with the RMA # written on the outside of the package: please do not write on or place stickers/labels on the original manufacturer's packaging.