Rode NTG1 Directional Shotgun Microphone

$349.00 $249.00
(You save $100.00)
SKU:
ROD-NTG1
UPC:
6.98813E+11
Condition:
New
Availability:
Available
Shipping:
Calculated at Checkout
reverb_sync:
off
  • RODE NTG1 Shotgun Microphone Kit
  • RODE NTG1 Shotgun Microphone Front
  • RODE NTG1 Shotgun Microphone mounted
  • RODE NTG1 Shotgun Microphone range
  • RODE NTG1 Shotgun Microphone Kit
  • RODE NTG1 Shotgun Microphone Front
  • RODE NTG1 Shotgun Microphone mounted
  • RODE NTG1 Shotgun Microphone range

What's in the Box:

  • RODE NTG-1 Shotgun Microphone
  • RODE RM5 Durable Microphone Clip
  • RODE WSVM Pop Filter/Wind Shield
  • RODE ZP1 Padded Zip Pouch
  • 10 Year Manufacturers Warranty with Product Registration

Product Documents:

The RØDE NTG-1 Condenser Shotgun Microphone is designed for professional audio capturing in the field or indoors. With a history of manufacturing quality studio microphones, Rode has implemented low noise output electronics and wide bandwidth, both of which attribute to the NTG-1's broadcast sound quality.

The supercardioid polar pattern and line plus gradient acoustic principle effectively minimize audio and noise at the off-axis (sides) of the microphone, while the front of the capsule accurately reproduces incoming audio signal. The result is greater intelligibility and signal-to-noise ratio while using the NTG-1 in noisy environments.

The NTG-1 is powered with an external +48 Volt phantom power source; the output is a standard 3-pin XLR male connector.

The microphone features a rugged, all metal, light weight enclosure that is ideal for camera mounting yet durable enough to withstand the rigors of heavy road use. The Rode NTG-1 is packaged with a microphone stand mount and windscreen.

Supercardioid Polar Pattern The supercardioid polar pattern and line gradient acoustic principle allow for a narrow pick up pattern at the front of the capsule while minimizing noise at the off-axis sections.

Lightweight Durable Construction The NTG-1 features a lightweight metal housing that is ideal for camera mounting.

Low Handling Noise Low noise output electronics provides high signal-to-noise ratio. The NTG1 is designed to also reduce noise caused by handling, rigid mounting hardware, loose cabling etc.

Acoustic Principle Line Gradient
Active Electronics JFET impedance converter with bipolar output buffer
Capsule 0.50"
Polar Pattern Supercordioid - Picks up the front and side and rejects 150° to the rear
Address Type End
Frequency Range 20Hz - 20kHz
Output Impedance 50Ω
Maximum SPL 139dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level 6.9mV
Sensitivity -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) 18dB-A
Power Options +24 phantom power required from mixer or interface +48 phantom power required from mixer or interface
Weight 105gm
Dimensions 219.00mmH x 22.00mmW x 22.00mmD
Output 3-pin XLR Output
Warranty 1 year with free extension to 10 years following registration with manufacturer