RODE NTG-3 Shotgun Microphone (Satin-Nickel)

NTG-3 Shotgun Microphone vertical

RODE

$899.00 $699.00
(You save $200.00)
SKU:
ROD-NTG3
Condition:
New
Availability:
In Stock
Shipping:
Free Shipping

Buy Now, Pay Later. Financing now available with Klarna.
Available on orders $149 and up.* Learn More

View Detail

What's in the Box:

  • RODE NTG3 (Satin-Nickel) RF-Bias Shotgun Microphone
  • RODE RM5 Durable Microphone Clip
  • RODE ZP2 Padded Zip Pouch (large)
  • RODE WSNTG3 Pop Filter
  • Aluminium Storage Cylinder
  • 10 Year Manufacturers Warranty with Product Registration

Product Documents:

The RØDE NTG3 super-cardioid shotgun microphone is designed for professional use on film, television, electronic news gathering and wherever high-resolution broadcast audio is required.

As RØDE's premier directional microphone the NTG3 exhibits superlative audio quality with a rich, warm quality and a full frequency response. Its RF bias technology makes it almost completely resistant to moisture, making it the only option when recording in demanding environments where condensation is an issue.

Machined from solid brass and available in either anti-glare, nickel-plated finish or matte black (NTG3B), the NTG3 is incredibly robust while remaining light weight.

Its precise yet forgiving polar pattern ensures that whether used on-camera or on a boom pole, the NTG3 will capture audio clearly every time.

A durable aluminum storage cylinder is supplied to provide the ultimate protection for the NTG3 while in storage and transport. Tightly sealed at both ends the cylinder is highly weatherproof, adding to the microphone's rugged performance credentials.

The RØDE NTG3 shotgun microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.

Sound Features You Need at the Price You Want

The RØDE NTG-3 Shotgun Microphone is a fully-featured mic that stands shoulder-to-shoulder with the industry-standard Sennheiser 416. The difference is that the NTG-3 is $699, compared to $1199, making it accessible to more filmmakers and more crews. No matter what your budget, if you're going to shoot high definition video, you need to complement it with high def sound.

Radio Frequency Rejection

Nothing is worse than a great shot being ruined by something you can’t even hear. The NTG-3 provides a radio-frequency (RF) interference rejection feature, allowing you to avoid annoying noise from nearby RF sources, such as radio antennas, WiFi networks, internet devices, power lines, and more. When you consider just how many of these sources of interference are around even in rural areas, it’s clear that RF interference rejection is necessary for filmmakers and sound technicians in any setting.

Precise Directional Pickup

Record only what you want and who you want with the RØDE NTG-3’s first-class directional pickup. With a high level of accuracy and sensitivity over a considerable range, a high frequency response, and a low noise floor, this mic records crystal clear audio. Whether you’re in the studio or outdoors, you can rely on high definition audio from RØDE.

Braves the Storms

This professional shotgun mic is expertly crafted to withstand adverse weather conditions. Come wind, rain, sleet or snow, its hardy construction will keep your audio recording running smoothly. If you ever have to film outside, you know how quickly the weather can turn poor—and sometimes you need to finish the shoot anyway. Any serious film crew needs a microphone of this caliber in their kit.

DVeStores own Guy Cochran tested the RØDE NTG-3 along with the Canon 5D Mark II and the external Tascam DR-100 recorder. Watch below:

The RODE NTG-3 Shotgun Microphone is available in DVeStore's ready-to-go kits. The most popular NTG-3 kit is our DVcreator Location sound package 4, which includes both the RODE Blimp and an internally-cabled K-TEK Boom pole. You can also search for "NTG-3" to explore more bundles.

The RØDE NTG-3 is easy to setup—remember 48v phantom power is required.

  1. Plug the XLR cable into microphone
  2. Turn on 48V Phantom Power
  3. Position the mic towards the desired source, keeping in mind that the NTG-3 does have a "Tail" and "hears" from behind
  4. Adjust the audio to desired levels

Optional

  1. Place the mic in a shockmount to avoid low end rumble and handling noise
  2. Use the included foam windscreen, or a blimp to avoid wind noise
Acoustic Principle Line Gradient
Active Electronics RF Bias
Capsule 0.50"
Polar Pattern Supercordioid - Picks up the front and side and rejects 150° to the rear
Address Type End
Frequency Range 40Hz - 20kHz
Output Impedance 25Ω
Maximum SPL 130dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level 8.2mV
Sensitivity -30.0dB re 1 Volt/Pascal (31.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) 13dB-A
Power Options +48 phantom power required from mixer or interface
Weight 163gm
Dimensions 255.00mmH x 19.00mmW x 19.00mmD
Output 3-pin XLR Output
Warranty 1 year with free extension to 10 years following registration with manufacturer
Shipping

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

DVeStore does not pay import fees for international shipments.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

You can view the UPS Shipping Map below to estimate delivery time for your UPS Ground package.

UPS Shipping Map

Fraud Prevention

At DveStore we work diligently to protect the safety and security of our customers and our assets.
All orders are at our discretion to be checked for fraudulent activity on varying levels of research. If we are unable to verify your payment through the information you have provided, we will communicate what is needed for us to move forward with the order process. Additional information, including but not limited to, a photo ID, passport and/or payment details may be requested. Orders processed with Paypal secure payment system will never be asked for credit card information. Should you choose to check out with Paypal, we ask that you reference or use the email address which your Paypal account is linked to.

DveStore’s integrity to communicate with our customers holds true in our payment processing procedures. Questions or concerns are always welcomed.

Returns

Call: 1 (360) 653-7063
Email: order@dvestore.com

Refund Policy

All products carry a 100% satisfaction guarantee. If you are not satisfied for any reason, you may return the product for your money back less shipping charges, within 30 days of the original purchase. If the product has been used, a 15% re-stock fee may apply at our discretion.

To return an item for a refund, first call or email us to receive an RMA number. Please package item in all original packaging from the manufacturer, including any manuals, warranty cards and etc. (Missing these items will automatically subject the item to the 15% restocking fee) Please ship the item back with the RMA # written on the outside of the package: please do not write on or place stickers/labels on the original manufacturer's packaging.

Related Products

Customers Also Viewed

Top