RODE NT6 Compact 1/2" Condenser Microphone

RODE NT6 Compact 1/2" Condenser Microphone Mounted

RODE

$499.00 $429.00
(You save $70.00)
SKU:
ROD-NT6
Condition:
New
Availability:
In Stock
Shipping:
Calculated at Checkout

Buy Now, Pay Later. Financing now available with Klarna.
Available on orders $149 and up.* Learn More

View Detail

What's in the Box:

  • RODE NT6 Compact 1/2" Condenser Microphone with Remote Capsule
  • RODE RM5 Durable Microphone Clip
  • RODE WS5 Pop Filter/Wind Shield
  • RODE ZP1 Padded Zip Pouch
  • Swivel mount (2-axis)
  • 10' Kevlar Cable (Between Capsule and Body)
  • 1/4" to 5/8" Thread Adapter
  • 1/4" to 3/8" Thread Adapter
  • 10 Year Manufacturers Warranty with Product Registration

Product Documents:

The RØDE NT6 is specifically designed for difficult mounting applications. Although clearly relevant to instrument miking, the new NT6 is extremely well suited to any situation where a small 'unobtrusive' but powerful microphone system is required.

The 1/2" (externally biased) gold sputtered capsule is designed to attach to a custom made, multi-position swivel mount allowing it to be independently positioned with ease. The capsule is connected to the remote pre-amplifier (body) by a custom 3m Kevlar® fibre reinforced cable.

The surface-mount pre-amplifier circuit also incorporates a two position variable pad: 0 dB and -10 dB attenuation, and a 2-position variable high-pass filter that enables you to step from a flat response to 80Hz high pass filter; both conveniently located away from the capsule, providing additional control without the need to move the capsule once in position.

The RØDE NT6 is an extremely compact 1/2" cardioid condenser microphone, specifically designed for difficult mounting applications where the highest quality audio is required.

Although clearly relevant to instrument miking, the NT6 is extremely well suited to any situation where an unobtrusive but powerful microphone is required such as location recording.

The microphone is split into two modular components, joined by via a custom 3m (10') shielded, Kevlar® reinforced cable.

Featuring a gold-sputtered, true-condenser capsule, the NT6 capsule head measures 45mm (1.8”) in length and weighs only 42gm (1.5oz). The included all-metal, multi-position mounting ring provides 180 degrees of vertical rotation.

The NT6 preamp-body incorporates both a high-pass filter and pad setting. The high-pass filter can be introduced to cut vibration, rumble and undesired sounds sources under 80Hz, while the PAD offers a -10dB level attenuation, useful when recording louder sound sources.

The NT6's small form factor make it an ideal small diaphragm cardioid microphone for use in the Mid-Side (M/S) stereo array, in combination with a figure-8 large diaphragm microphone such as the NT2-A, NT2000 or K2.

The NT6 is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty.

Features:

  • 1/2” condenser capsule with remote preamp
  • Gold sputtered externally biased condenser
  • Two position PAD - 0dB and -10dB
  • Two position High Pass Filter - flat and 80Hz
  • Includes two-axis swivel mount, 3m Kevlar® fibre reinforced cable, windshield and zip pouch
  • Heavy duty satin-nickel plated body
  • Low noise and full frequency response
  • Designed and manufactured in Australia
  • 10 year extended warranty when you register your microphone

Acoustic Principle Pressure Gradient
Active Electronics JFET impedance converter with bipolar output buffer
Capsule 0.50"
Polar Pattern Cordioid - Picks up audio from the front and sides and rejects from the rear
Address Type End
Frequency Range 40Hz - 20kHz
Output Impedance 200Ω
Maximum SPL 135dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level 6.0mV
Sensitivity -37.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) 19dB-A
Power Options +24 phantom power required from mixer or interface +48 phantom power required from mixer or interface
Weight 386gm
Dimensions 189.00mmH x 64.00mmW x 20.00mmD
Output 3-pin XLR Output
Warranty 1 year with free extension to 10 years following registration with manufacturer
Shipping

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

DVeStore does not pay import fees for international shipments.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

You can view the UPS Shipping Map below to estimate delivery time for your UPS Ground package.

UPS Shipping Map

Fraud Prevention

At DveStore we work diligently to protect the safety and security of our customers and our assets.
All orders are at our discretion to be checked for fraudulent activity on varying levels of research. If we are unable to verify your payment through the information you have provided, we will communicate what is needed for us to move forward with the order process. Additional information, including but not limited to, a photo ID, passport and/or payment details may be requested. Orders processed with Paypal secure payment system will never be asked for credit card information. Should you choose to check out with Paypal, we ask that you reference or use the email address which your Paypal account is linked to.

DveStore’s integrity to communicate with our customers holds true in our payment processing procedures. Questions or concerns are always welcomed.

Returns

Call: 1 (360) 653-7063
Email: order@dvestore.com

Refund Policy

All products carry a 100% satisfaction guarantee. If you are not satisfied for any reason, you may return the product for your money back less shipping charges, within 30 days of the original purchase. If the product has been used, a 15% re-stock fee may apply at our discretion.

To return an item for a refund, first call or email us to receive an RMA number. Please package item in all original packaging from the manufacturer, including any manuals, warranty cards and etc. (Missing these items will automatically subject the item to the 15% restocking fee) Please ship the item back with the RMA # written on the outside of the package: please do not write on or place stickers/labels on the original manufacturer's packaging.

Customers Also Viewed

Top