What's in the Box:
- RODE NT55 Multi-Pattern 1/2" Condenser Microphones
- RODE NT45-O Interchangeable Omnidirectional Capsule
- RODE RM5 Durable Microphone Clip
- Custom Case
- 10 Year Manufacturers Warranty with Product Registration
The NT55 utilises the 1/2" gold sputtered true condenser transducer used in the internationally renowned RØDE NT5. The NT55 is a low-noise, balanced output microphone, exhibiting a wide dynamic range and full frequency response.
The NT55 circuit incorporates a three position variable PAD with 0dB, -10dB or 20dB attenuation, and a thereposition variable high-pass filter that enables you to step from a flat response to 75 or 150 Hz high pass filter.
The NT55 comes with two different condenser microphone heads to provide a wide variety of polar patterns. The NT55 is complemented with a diverse range of accessories to better facilitate positioning and attachment.
Like the NT5, the RØDE NT55 is a small-diaphragm, true-condenser cardioid microphone, sometimes referred to as a 'pencil mic'. The NT55 adds both a three position pad (0, -10dB, -20dB) and three stage high pass filter (Off, 75Hz, 150Hz), and includes the interchangeable NT45-O omnidirectional capsule.
Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer.
Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom.
Finished in durable satin nickel, the NT55 available as a single microphone or as an acoustically matched pair.
The NT55 is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty.
- Externally biased condenser
- Cardioid or Omni polar pattern using included interchangable capsules
- Gold sputtered 1/2” capsule
- Three position PAD - 0dB, -10dB and -20dB
- Three position High-Pass Filter - flat, 75Hz and 150Hz
- Surface mount circuitry
- Low noise
- Available as Certified Matched Pair
- 10 year extended warranty when you register your microphone
|Acoustic Principle||Pressure Gradient|
|Active Electronics||JFET impedance converter with bipolar output buffer|
|Frequency Range||20Hz - 20kHz|
|Maximum SPL||136dB SPL (@ 1kHz, 1% THD into 1KΩ load)|
|Maximum Output Level||8.0mV|
|Sensitivity||-38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz|
|Equivalent Noise Level (A-weighted)||15dB-A|
|Dimensions||145.00mmH x 20.00mmW x 20.00mmD|
|Warranty||1 year with free extension to 10 years following registration with manufacturer|