Rode NT1 + Ai-1 Interface Bundle

Rode Complete Studio Kit with AI-1 Audio Interface, NT1 Microphone, SMR Shockmount, and Cables


$479.00 $349.00
(You save $130.00)
ROD-NT1 + Ai-1 Interface Bundle
Now Available!
Calculated at Checkout

Buy Now, Pay Later. Financing now available with Klarna.
Available on orders $149 and up.* Learn More

View Detail

What's in the Box

  • AI-1 Studio-Quality USB Audio Interface
  • USB Cable
  • Registration Card for Ableton Live Lite
  • Limited 2-Year Warranty
  • NT1 Cardioid Condenser Microphone (Microphone Only)
  • Stand Mount for NTK/NT1000 & Condenser Microphones
  • Microphone Dust Cover
  • Limited 10-Year Warranty
  • SMR Advanced Shock Mount for Large Diaphragm Condenser Mics
  • Limited 1-Year Warranty

The Rode Complete Studio Kit combines the AI-1 USB audio interface with the NT1 cardioid condenser microphone, the SMR advanced shockmount with pop filter, a premium XLR cable, a USB cable, and a copy of Ableton Live Lite to create an all-in-one solution for recording vocals and instruments in a project studio or while on the go.

AI-1 Studio-Quality USB Audio Interface

The Rode AI-1 is a studio-quality audio interface well suited for recording vocals, instruments, and voice-overs into your Mac or Windows computer. The interface features a single, combo XLR-1/4" input with phantom power, two balanced 1/4" monitor outputs, and a single, discrete, studio-quality headphone output and level control. The device can operate in zero-latency monitoring mode, which connects the preamp directly to the headphone output for delay-free performance while recording. With the headphone input engaged, the two monitor outputs are bypassed. To engage the monitor outputs, simply remove the headphone plug from the jack.

The rugged aluminum body is finished with a satin black finish and features large rubber feet, which prevents the desktop interface from sliding about when engaged. The class compliant AI-1 requires no drivers and features a USB-C connector, which not only connect to your computer, but also provides powers as well. The Rode AI-1 ships with a USB cable and a license for Ableton Live Lite.

  • Desktop USB audio interface with low-noise Class-A discrete preamplifier
  • Sampling rate of up to 96kHz/24-bit
  • One combo XLR-1/4" combo input
  • Two balanced 1/4" monitor outputs
  • One discrete, studio-quality headphone output
  • Phantom power for condenser microphones
  • Zero-latency monitor mode
  • USB bus powered
  • USB Type-C connector for future proof operation
  • Rugged body with Satin Black Finish
  • Class compliant—no drivers required
  • Includes Ableton Live Lite
  • Includes USB cable


NT1 Cardioid Condenser Microphone (Microphone Only)

The NT1 Cardioid Condenser Microphone from RODE is a large-diaphragm cardioid condenser microphone that features RODE's HF6 1" capsule. The HF6 is designed to provide a detailed midrange response with smooth highs and warm bass. The capsule itself is seated in a Rycote Lyre internal shockmount to help reduce vibration and handling noises.

The microphone's electronics were designed from the ground-up for quiet performance, and allow the NT1 to have a low, 4.5 dB of self-noise. The body of the mic is machined from nickel-plated aluminum that is then coated in a ceramic layer that is electrostatically applied for a scratch-resistant finish. The NT1 includes the RM2 mic clip and has a 1-year limited warranty that extends to 10-years after registration with RODE.

SMR Advanced Shock Mount for Large Diaphragm Condenser Mics

The Rode SMR is a professional-grade shock mount for large diaphragm condenser mics. Featuring a double-Lyre suspension system, the SMR enhances Rycote’s Lyre system by using a smaller inner Lyre to act as a tensioning element.

The SMR's removable all-metal pop filter provides an integrated solution for plosive protection, that is washable and designed to last as long as the shock mount and microphone. The SMR's clamping system design utilizes a large surface area, allowing for ample friction and weight handling, without the need for over-tightening of the locking thread. With the load distributed over a greater surface area, the clamping system is designed to better withstand the wear and tear of repeated use.

The SMR's frame is made from an engineering grade reinforced polymer. Vibration force is evenly distributed around the outer frame via the wide mounting rails, increasing the effectiveness of the Lyre system.

A base nut is also included, suitable for all compatible Rode microphones.



AI-1 Studio-Quality USB Audio Interface

Analog Inputs and Outputs Input: 1 x Neutrik XLR-1/4" / 6.35 mm combo
Outputs: 2 x 1/4" / 6.35 mm (impedance
balanced), 1 x 1/4" / 6.35 mm (headphones)
Computer Connectivity USB Type-C
Form Factor Desktop
Mic Preamps 1
Phantom Power Yes
Bit Depth 24-bit
Sample Rates 44.1, 48, 88.2, 96 kHz
Zero-Latency Direct Monitoring Yes
USB Bus Powered Yes
OS Requirements Mac OS X 10.10 or later
Windows 7 or later
Dynamic Range 104 dBu
Equivalent Noise Equivalent Input Noise at Maximum Gain: -128
dBA (source impedance 150 ohms, 20
Hz to 20 kHz, A-weighted)
Frequency Response 20 Hz to 20 kHz (better than ±1 dB, measured after ADC)
Gain Range 0 to 45 dB
Input Impedance XLR Mic Input: 1.3 kOhms
Instrument Input: 0.9 MOhms
Monitor Outputs Max Output Level: -6 dBu
Headphone Output Max Output Power (at 1% THD):
32 Ohms, 24 mW,
300 Ohms, 245 mW
Dimensions (D x W x H) 3.9 x 4.9 x 1.5" / 100.0 x 124.0 x 38.0 mm
Weight 19.8 oz / 561.3 g

NT1 Cardioid Condenser Microphone (Microphone Only)

Operating Principle Pressure Gradient
Transducer Condenser
Diaphragm 1" / 25.40 mm
Polar Pattern Cardioid
Frequency Range 20 Hz to 20 kHz
Equivalent Noise Level 4 dB A-Weighted
Maximum SPL 132 dB SPL
THD 1%
Impedance 100 Ohms
Sensitivity -29 dB
Output Connectors 1 x 3-Pin XLR
Operating Voltage 24 V
48 V
Length 7.36" / 187 mm
Diameter 1.97" / 50 mm
Weight 0.97 lbs / 440 g
Box Dimensions (LxWxH) 9.1 x 5.5 x 3.4"

SMR Advanced Shock Mount for Large Diaphragm Condenser Mics

Dimensions 5.0 x 9.0 x 8.3" (130 x 220 x 210 mm)
Weight 9.2 oz (260 g)
Box Dimensions (LxWxH) 10.158 x 7.795 x 4.803"

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

DVeStore does not pay import fees for international shipments.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

You can view the UPS Shipping Map below to estimate delivery time for your UPS Ground package.

UPS Shipping Map

Fraud Prevention

At DveStore we work diligently to protect the safety and security of our customers and our assets.
All orders are at our discretion to be checked for fraudulent activity on varying levels of research. If we are unable to verify your payment through the information you have provided, we will communicate what is needed for us to move forward with the order process. Additional information, including but not limited to, a photo ID, passport and/or payment details may be requested. Orders processed with Paypal secure payment system will never be asked for credit card information. Should you choose to check out with Paypal, we ask that you reference or use the email address which your Paypal account is linked to.

DveStore’s integrity to communicate with our customers holds true in our payment processing procedures. Questions or concerns are always welcomed.


Call: 1 (360) 653-7063

Refund Policy

All products carry a 100% satisfaction guarantee. If you are not satisfied for any reason, you may return the product for your money back less shipping charges, within 30 days of the original purchase. If the product has been used, a 15% re-stock fee may apply at our discretion.

To return an item for a refund, first call or email us to receive an RMA number. Please package item in all original packaging from the manufacturer, including any manuals, warranty cards and etc. (Missing these items will automatically subject the item to the 15% restocking fee) Please ship the item back with the RMA # written on the outside of the package: please do not write on or place stickers/labels on the original manufacturer's packaging.

Related Products

Customers Also Viewed