The Production Kit has been designed as a cost effective solution where multiple unobtrusive microphones are required, for example, reality television, theatre and sporting events. Two kits provide a full 5.1 microphone surround sound solution. The microphones are self-powered, however a Que phantom powered cable can be utilised if required.
*Pencil profile mini shotgun microphone
*Hypercardioid for excellent on/off axis and rear rejection.
*High sound pressure level.
*Detachable cable with a full range of interchangeable connectors allowing
the microphone to interface with a wide range of audio inputs.
*The unique boom pole will extend from 33cms to 1.5m and if attached to the
base it becomes either a table top or floor microphone stand. Utilisation of
the mini gooseneck clamps allows for discreet microphone placement
*High Sound Pressure Level
3 x Mini Shotgun microphone
3 x Base 3 x Mini shock mount
3 x Foam wind sock
3 x 3.5 TRS adapter
3 x Gooseneck clamp
3 x WOMBAT (fluffy windjammer)
3 x 3.5 to XLR phantom adapter
1 x Carry case
3 x Boom 33 cms > 1.5 m
Specifications - Mini Shotgun
Capsule principle - Back electret
Frequency response - 30hz > 18Khz
Polar pattern - line and gradient - Hypercardioid
Sensitivity -36dB @ 1v @1 Pa
Sound pressure level 124 dB @1 KHz
Capsule impedance - 600 ohms
Power requirement - 3v internal
Battery type - 2 x A84 button cells
Battery life – approximately 100 hours of continuous use Size - Length 125mm Dia 10mm
*Specification and designs subject to alteration without notice