Nimbus WiMi6400 3G-SDI, HDMI & VGA Transmitter/Receiver Set

$1,989.00
SKU:
NIM-WiMi6400T/R
UPC:
1.93913E+11
Availability:
Ships from manufacturer
Shipping:
Calculated at Checkout
Manufacturer Part Number:
WiMi6400T/R
  • Nimbus WiMi6400 3G-SDI, HDMI & VGA Transmitter/Receiver Set
  • Nimbus WiMi6400 3G-SDI, HDMI & VGA Transmitter/Receiver Set
  • Nimbus WiMi6400 3G-SDI, HDMI & VGA Transmitter/Receiver Set
  • Nimbus WiMi6400 3G-SDI, HDMI & VGA Transmitter/Receiver Set
  • Nimbus WiMi6400 3G-SDI, HDMI & VGA Transmitter/Receiver Set
  • Nimbus WiMi6400 3G-SDI, HDMI & VGA Transmitter/Receiver Set
  • Nimbus WiMi6400 3G-SDI, HDMI & VGA Transmitter/Receiver Set
  • Nimbus WiMi6400 3G-SDI, HDMI & VGA Transmitter/Receiver Set

What's in the Box

  • Nimbus WiMi6400 3G-SDI, HDMI & VGA H.264 Transmitter/Receiver Set
  • 2 x Nimbus DCA12 12 VDC Adapter for WiMi6400 and WiMi5300A
  • Limited 1-Year Warranty

The WiMi6400 3G-SDI, HDMI & VGA H.264 Transmitter/Receiver Set from Nimbus transmits up to a 1080p60 signal over a direct twisted pair cable connection or via a twisted pair connection to a network. In the latter scenario, IP addresses are easily matched up via a Web User Interface. With the use of a multicast IP address, the transmitter is capable of multicasting to an unlimited number of receivers.

Alternatively, via a network connection, the transmitter can be used standalone to live-stream to RTSP destinations from your computer. In all cases, distances are limited to the maximum length your twisted pair cabling allows. Latency is only 80ms. Cat 5e and higher cables are supported.

The transmitter encodes the input signal in H.264. Using optional dedicated software, you can watch the H.264 signal live on your computer by entering in the IP address. Also, output video can be scaled up to 1080p60 via the Web UI. Additionally, a full-duplex serial port allows relaying external control signals for applications such as digital signage.

Key Features

  • Up to 1080p60 transmission of 3G/HD/SD-SDI (SMPTE), HDMI, and VGA signals
  • Direct Ethernet cable connection
  • Ethernet cable connection to a network
  • Standalone live-streaming to RTSP destinations via a network connection
  • Unlimited multicasting
  • 80ms latency
  • H.264 MPEG-4 Parts 10: AVC encoding
  • 30 Mb/s maximum encoding rate
  • 10/100 BASE-TX RJ45 port
  • Baseline Profile with level 4.2
  • RTSP streaming server (RTP/UDP)
  • MPEG-2 TS/UDP streaming
  • Full-duplex serial port
  • Relay streaming server on the receiver end
  • Scaling to up to 1080p60 on output via Web UI
  • Digital audio: linear-PCM (44.1 kHz / 48 kHz)
  • Analog audio: stereo, 48 kHz 16-bit linear PCM, G.711
  • Back channel audio: 8 kHz 16-bit linear PCM
  • 3.5mm analog audio stereo phone input/output
  • Web User Interface settings