What's in the Box
- M4250-9G1F-PoE+ (GSM4210PD)
- Power Adapter
- Power cord(s)
- Console USB Type-C cable
- Flat brackets for desktop or wall mounting
- Rubber footpads for tabletop installation
- Installation guide
Netgear M4250-9G1F-PoE+ Managed Switch (GSM4210PD)
Groundbreaking AV GUI
A simplified user interface makes it easy to assign configuration profiles to each port.
Multicast in an Instant
NETGEAR IGMP Plus™ provides multicast functionality right out of the box for most AV over IP applications.
Sleek, Quiet Design
Less fan noise, and mounting ears included for under-table or wall mounting.
Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.
Fast, easy configuration for AV Pros
A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.
Focus on the event, not the noise.
Most models have quiet mode which greatly reduces fan noise, and some models are even fanless.
Designed for AV over IP right out of the box.
With built-in NETGEAR IGMP Plus™, there's little-to-no setup required for flawless Video over IP delivery. Enable multicasting right out of the box.
|Primary Port Speed||1 Gigabit|
|Number of Ports||10 (8x 1G PoE+, 1x 1G, 1x SFP)|
|PoE Ports / Budget||8 PoE+ (30W/port), 110W Budget|
|IGMP Support||Enhanced (NETGEAR IGMP Plus™)|
|Jumbo Frame Suppor||Yes, up to 12kb|
|AVB Support||Yes. Electronic license required, activation key sent via email (AVB4210PD-10000S)|
|Power Consumptio||With PoE: 132.25W/451.5Btu/hr
Without PoE: 9.88W/33.73Btu/hr
Standby without any port connection: 6.4W/22.02Btu/hr