Matrox QuadHead2Go Q185 Multi-Monitor Controller Appliance

$1,295.00 $1,195.00
(You save $100.00)
Ships from manufacturer
Calculated at Checkout
Manufacturer Part Number:
  • Matrox QuadHead2Go Multi-Monitor Controller Appliance

What's in the Box

  • Matrox QuadHead2Go Q185 Multi-Monitor Controller Appliance
  • 12 VDC Power Supply
  • 6' Power Cable Set (US, EU, UK, AU/NZ)
  • Limited 3-Year Warranty

Deploy your video wall or split a single signal with up to four displays using the QuadHead2Go Multi-Monitor Controller Appliance from Matrox. Designed for ease-of-use, this controller can be used in a plug-and-play fashion with the default 2 x 2 landscape orientation. Or, users can choose from portrait or other asymmetrical or non-rectangular orientations as well as rotated, cloned, or cropped feeds. Accepting resolutions up to 4K at 60 Hz via a DisplayPort 1.4 input, the QuadHead2Go offers max output resolutions up to 1920 x 1080 via four HDMI outputs. Additionally, an RJ45 port supports wired Gigabit Ethernet connectivity.

Content Flexibility

Choose from a wide selection of content sources, including professional graphics cards and integrated GPUs, video wall controllers, digital signage players, media players, decoders, laptops, NUCs, set-top boxes, gaming consoles, and more.

Artistic Freedom

Design modern and artistic video wall layouts with free rein—each output can have its own resolution, be independently rotated 90, 180, or 270 degrees, cropped, upscaled, downscaled, and positioned anywhere.

Custom Configurations

Design any custom configuration or array with the intuitive Matrox PowerWall software, available separately.

Don't Sweat the Bezel

Control and fine-tune bezels using presets to ensure seamless image displays.


Input 1 x DisplayPort 1.2
Output 4 x HDMI
Maximum Input Resolution 3840 x 2160 60/30
7680 x 1080 60/30
1920 x 4320 60/30
Maximum Output Resolution 1920 x 1080 60/30
1920 x 1200 60/30
Memory 1 GB


Supported Configurations 2 x 2 (Default), 4 x 1, 3 x 1, 2 x 1, 1 x 2, 1 x 3, 1 x 4; Supports Landscape, Portrait, and Other Non-Rectangular/Artistic Configurations
Rotation 90, 180, or 270°
Multiple Units Yes
Matrox Monitor Bezel Management Yes
Clone Mode Yes
HDCP Support Yes

Video & Audio

Video Scaler Matrox's Advanced Multichannel Video Scaling Engine
Rotation 90, 180, or 270°
Cropping Yes
Audio Format AAC, PCM, Stereo, and Mono
Audio Sampling Rate 44.1 and 48 kHz 16-Bit

Network Interface

Standard Ethernet 10/100/1000 Base-T, Auto-Detect, Half/Full-Duplex
Connector RJ45
Internet Protocol IPv4
IP Address Assignment DHCP (Default) and Static IP

Protocol Support

Control Interface 1 x 10/100/1000 Base-T RJ45 Ethernet Port
Control Protocols HTTP/HTTPS, UPnP (Discovery), mDNS and DNS-SD (Discovery)
Firmware Updates Via Network Interface


Input RGB: 8:8:8 (24-Bit per Pixel) YUV: 4:4:4, 4:2:2 (8-Bit per Component)
Output RGB: 8:8:8 (24-Bit per Pixel)

Power and Operating Requirements

Power Requirements 12 VDC, 2 A
Maximum Power Consumption 15 W
Power Supply Unit 100-240 VAC, 50/60 In, 12 VDC Out, 42 W DIN4 Locking Power Connector

Environmental Conditions

Operating Temperature 32 to 113°F / 0 to 45°C
Operating Humidity 20 to 80% (Non-Condensing)
Storage Temperature -40 to 158°F / -40 to 70°C
Storage Humidity 5 to 95% (Non-Condensing)


Dimensions 5.50 x 1.25 x 7.13" / 13.97 x 3.18 x 18.11 cm
Weight 1.09 lb / 494 g
Environmental Certification EMC Class A: FCC, CE, KC, RCM

Packaging Info

Package Weight 3.96 lb
Box Dimensions (LxWxH) 10.7 x 6.9 x 5.3"