null

Magewell Pro Convert NDI to HDMI 4K

$999.00
SKU:
MAG-64110
UPC:
8143950201294
Availability:
Out of Stock
Shipping:
Free Shipping within Contiguous 48 States*
Manufacturer Part Number:
64110
Availability Details:
Ships from Manufacturer
  • Magewell Pro Convert NDI to HDMI 4K
  • Magewell Pro Convert NDI to HDMI 4K
  • Magewell Pro Convert NDI to HDMI 4K
  • Magewell Pro Convert NDI to HDMI 4K

Magewell 64110 Pro Convert is an NDI HX to HDMI 4K Converter/Stand Alone 4K60 IP Stream Decoder. Convert multi-protocol IP-based stream into 4K HDMI signal. Support decoding streams of NDI, NDI HX, RTSP, HTTP, RTMP Pull/Push and TS over UDP/SRT/RTP, Support decoding videos in H.264 or H.265 format. amd Support decoding up to 4K 60fps signal.

Supported Web Browser (tested):Microsoft Internet Explorer 11
Microsoft Edge
Mozilla Firefox version 61 and above
Google Chrome version 49 and above
Apple Safari 11.1 and above
Opera 55.0.2994.44 and above
Output Interfaces:HDMI
DVI-D 1.0
HDMI 1.4
HDMI 2.0
Storage Interface:SD Card (functions to be developed)
Screw Mounting Hole:1/4-20 mounting hole
Network Interfaces:10/100/1000Mbps Ethernet
IEEE 802.3af PoE
USB Interface:USB2.0 Type B
5V/2.1A power supply
USB RNDIS/ECM
USB3.0 Type A
Support for connecting peripherals (keyboard and/or mouse) to customize the video and audio settings
Control Buttons:MENU: press to display the menu, or cycle through the options
SELECT: press to display the menu, enter current option, or confirm the selection
HDMI Output Features:Support for up to 4096x2160 60fps HDMI output
Support for 96KHz 16bits 8-channel audio streams
Support for delivering videos at the preferred video format according to the EDID of the connected monitor
Stream Decoding Features:Support for decoding full NDIr and NDI HX in NDI 4.x
Support for decoding streams of NDI, RTSP, HTTP, HLS, RTMP Pull/Push and MPEG-TS over UDP/SRT/RTP
Support for decoding videos in H.264 and H.265 format
Support for decoding AAC/MP3 audios
Support for up to 150M pixels/s decoding
When receiving 2K NDIr stream, the device could decode and convert it to 2K 60fps
When receiving 4K NDIr stream, the device could decode and convert it to 4K 15fps
Support for modifying configurations using the Web UI or the Options menu
Setting Video OSD composition, including
Source name & resolution
Tally indicators
Audio meter
Audio meter scale
Center cross
Safe area
Video scaling, frame rate and aspect ratio conversion
Video color format conversion
Auto or manual selection of input color format
Support YUV BT.601, YUV BT.709 color formats
Video vertical and mirror flip
Remote controlling the PTZ device connected to the video source
setting audio gain, sample rate and channels/td>
Device Name:Support for setting the device name shown in the system using Web UI. By default, the device name is 'Pro Convert'.
Support for setting board-index, from 0 to F, through the on-board rotary switch
Firmware Upgrade:Support for manual update using Web UI
LED Indicator:Power LED Status Indicator:
On: power connected
Off: power unconnected
Decode LED Status Indicator:
On: decoding in progress
Blinks: decoding error
Off: source unselected
Form Factor:100.9mm (L) x 60.2mm (W) x 23.3mm (H)
Firmware Upgrade:Support for manual update using Web UI
Accessories:USB 2.0 A to B Cable
5V/2.1A power adaptor
L-bracket
Power Consumption:5V max current: ~1.1A
Max power consumption: ~5W
Working Environment:Operating temperature: 0 to 45 deg C
Storage temperature: -20 to 70 deg C
Relative Humidity: 5% to 90% non-condensing