Magewell Pro Convert for H.26x to SDI

Out of Stock
Free Shipping within Contiguous 48 States*
Manufacturer Part Number:
Availability Details:
Ships from Manufacturer
  • Magewell Pro Convert for H.26x to SDI
  • Magewell Pro Convert for H.26x to SDI
  • Magewell Pro Convert for H.26x to SDI
  • Magewell Pro Convert for H.26x to SDI
  • Magewell Pro Convert for H.26x to SDI
  • Magewell Pro Convert for H.26x to SDI

What's in the Box

  • 1x Magewell 64170
  • 1x USB 2.0A to B Cable
  • 1x 5V/2.1A Power Adaptor
  • 1x L Bracket

The Magewell 64170 Pro Convert H.264 or H.265 to SDI multi-protocol streaming media decoder transforms an H.264 (AVC) or H.265 (HEVC) compressed video stream into a high-quality SDI output for connection to baseband monitors, projectors and switchers. Seamlessly bringing together the worlds of IP-based streaming and baseband display equipment.

Output Features:Max output: 1920x1080p60
Supported output formats are: 1920x1080p60/59.94/50/30/29.97/25/24/23.98, 1920x1080i60/59.94/50
1280x720p60/59.94/50/30/29.97/25/24/23.98, 720x576i50, 720x480i59.94
Support YUV BT.601, YUV BT.709 signal
Support 48KHz 16-bit 8-channel audio output
SD/HD/3G SDI output via BNC
Support SD (ST 259)/HD (ST 292)/3Ga (ST 425)/3Gb (ST 425)/3Gb-DL (ST 425)/3Gb-DS (ST 425) SDI standards
Output 3G-SDI signal and transmitted distance greater than 100m (328ft)
Decoding Features:Decoding up to 2Kp60 streamings of RTSP, HTTP, HLS, RTMP Pull/Push, and MPEG-TS over UDP/SRT/RTP protocols
H.264/H.265 video decoders
AAC/MP3 audio decoders
Web GUI Management:Provide comprehensive information regarding the device and input signals in real-time
Allow to configure how an input signal is processed and decoded, including: OSD setting, deinterlacing, resolution, frame rate, AR conversion, Audio gain, sample rate and audio channel mapping network connection
Update firmware
Support IE/Edge/Firefox/Chrome/Safari/Opera web browsers
Provide HTTP APIs.
On-board Control Buttons:MENU: press to display the menu, or cycle through the options
SELECT: press to display the menu, enter current option, or confirm the selection
16 Position Rotary DIP Switch: set board-index from 0 to F
Network Interfaces:10/100/1000Mbps Ethernet
IEEE 802.3af PoE
USB Interface:USB2.0 Type B
5V/2.1A power supply
USB3.0 Type A
Support for connecting peripherals (keyboard and/or mouse) to customize the video and audio settings
LED Indicator:Power LED Status Indicator:
On: power connected
Off: power unconnected
Decode LED Status Indicator:
On: decoding in progress
Blinks: decoding error
Off: source unselected
Form Factor:100.9mm (L) x 60.2mm (W) x 23.3mm (H)