Magewell 11520 Eco Capture HDMI 4K M.2 Single channel HDMI M.2 Card

$349.00
SKU:
MAG-11520
UPC:
8143950200983
Availability:
Ships from manufacturer
Shipping:
Calculated at Checkout
Manufacturer Part Number:
11520
reverb_sync:
off
  • Magewell Eco Capture HDMI 4K M.2 Card
  • Magewell Eco Capture HDMI 4K M.2 Card
  • Magewell Eco Capture HDMI 4K M.2 Card
  • Magewell Eco Capture HDMI 4K M.2 Card
  • Magewell Eco Capture HDMI 4K M.2 Card
  • Magewell Eco Capture HDMI 4K M.2 Card

Magewell Eco Capture HDMI 4K M.2

Single channel 4k capture card
HDMI + embedded audio



Supported OS Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64)
Linux (based on V4L2?support x86?x64 & ARM architecture)
Supported APIs Windows
  • DirectShow
  • DirectKS
  • Wave API/DirectSound/WASAPI
Linux
  • V4L2
  • ALSA
Supported Software VLC
VirtualDub
OBS
xSplit
vMix
VidBlaster
Wirecast
Microsoft Media Encoder
Adobe Flash Media Encoder
Any other DirectShow/V4L2 encoding/streaming software
Input Interfaces 2x JST SHD 20-Pin socket
  • DVI 1.0
  • HDMI 1.4a
Host Interface M.2 2280 Type M (PCIe Gen2 x4)
Input Features Support for input video resolutions up to 4096×2160 pixels
HDMI Specific Features 297MHz HDMI receiver
Adaptive HDMI equalizer
Support for customized EDID
Support for extraction of AVI/Audio/SPD/MS/VS/ACP/IRSC1/ISRC2/Gamut InfoFrames
Full colorimetry support
Support for RGB/YUV 4: 4: 4 8-bit format signals with a pixel frequency of no more than 297MHz
Support for YUV 4:2:2 12-bit format signals with a pixel frequency of no more than 297MHz
Support for RGB/YUV 4:4:4 10/12-bit format signals with a pixel frequency of no more than 170MHz
Support for up to 8-channel IEC60958/IEC61937 audio streams
Support for extraction of audio formation information & channel status data
Support for extraction of video timing information
Support for extraction of 3D format information
Support for extraction of Sony/Canon DSLR time code
Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.
Video Capture Formats Support for capture image resolutions up to 4096×2160 pixels
Support for capture frame rates up to 144fps (Actual capture frame rate can be limited by PCIe bandwidth & image resolution)
Support for 4:2:0 8-bit capture formats: NV12, I420, YV12
Support for 4:2:2 8-bit capture formats: YUY2, YUYV, UYVY
Support for 4:4:4 8-bit capture formats: V308, IYU2, V408, BGR24, BGR32
More capture formats are supported via Magewell Capture SDK for DirectKS
Video Processing Features Video processing pipeline with ~360Mpixels/s processing bandwidth
8-bit 4:4:4 video processing
Video cropping
Video scaling
Video de-interlacing
  • Weave
  • Blend top & bottom field
  • Top field only
  • Bottom field only
Video aspect ratio conversion
  • Auto or manual selection of input aspect ratio
  • Auto or manual selection of capture aspect ratio
  • Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)
Video color format conversion
  • Auto or manual selection of input color format & quantization range
  • Auto or manual selection of capture color format, quantization range & saturation range
  • Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
  • Support for Limited or Full quantization range
  • Support for Limited, Full & ‘Extended gamut’ saturation range
Video frame rate conversion
Multiple Cards per System Support for multiple cards plugged to one system
On-board dip switch to set card number with 16 positions
System hardware device tree will display “01: Eco Capture HDMI 4K M.2” when dip switch is set to 0001, and so on.
The video and audio device names displayed in your software will include the card number (set by the dip switch)
Multiple Replicated Capture Streams Unlimited capture streams for any one input channel, but the capture streams should be in the same capture format.
Timestamp & A/V Synchronization Hardware based 100ns high resolution clock
Audio frames (192 audio samples) & video frames are stamped with hardware clock
Hardware clock can be synchronized across cards (via SDK)
Video Capture SG-DMA ~1200MB/s per channel DMA bandwidth in PCIe 2.x system
~800MB/s per channel DMA bandwidth in PCIe 1.x system
Support for auto detection of Intel tiled GPU surface
Support for DirectGMA for AMD video adapter chipsets
Support for GPUDirect for Nvidia video adapter chipsets
SDK Magewell Capture SDK for DirectShow for easy integration (Windows)
Magewell Capture SDK for DirectKS for maximum flexibility & performance (Windows)
Windows Driver Tweaks All options can be controled by three levels of registry key: global level, product level and device level
Video, Audio, Crossbar filter names can be customized via registry keys
Firmware Upgrade Multiple cards in one system can be upgraded simultaneously
Cards can be upgraded without a system power shutdown (In most cases, even a reboot is not needed)
Safe upgrade. If power off or system break down occur when the firmware is being upgraded, it will automatically restore to the initial version.
This function is only available for firmware version 1.21 and above.
LED Indicator Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed.
Form Factor M.2 2280 standard size
Accessories 1 X SHD to HDMI type A breakout
Power Consumption Max current at 3.3V: ~ 1.12 A
Max power consumption: ~ 3.75 W
Working Environment Operating temperature: 0 to 40 deg C
Storage temperature: –20 to 70 deg C
Relative Humidity: 5% to 90% non-condensing