Lectrosonics SRc5P Dual-Channel Slot-Mount ENG Receivers

Out of Stock
Free Shipping within Contiguous 48 States*
Manufacturer Part Number:
  • Lectrosonics SRc5P Dual-Channel Slot-Mount ENG Receiver (B1: 537.600-614.375 MHz)

***Manufacturer B-STOCK item. In excellent condition.***

What's in the Box

  • Lectrosonics SRc5P Dual-Channel Slot-Mount ENG Receivers (B1: 537.600 to 614.375 MHz)
  • Adjustment Tool
  • 2 x Antennas
  • Limited 1-Year Warranty 

Due to manufacturer's restrictions this item cannot be shipped outside of the United States.

The SRc5P Dual-Channel Slot-Mount ENG Receivers from Lectrosonics consist of two separate receivers built into a single, ultra-compact housing with adapters for video camera receiver slots and for stand-alone use. They can be used when paired with a transmitter & microphone (sold separately) in various environments for ENG (Electronic News Gathering), EFP (Electronic Field Productions) and other audio applications.

Each receiver features Digital Hybrid Wireless technology that provides compandor-free audio quality and compatibility with other wireless systems. The RF performance is stable over a wide temperature range, making the receiver perfectly suited in rough environmental conditions.

The front panel has a menu-driven LCD interface and four membrane switches which are used to view and alter settings. In addition, the LCD window also displays the pilot-tone indicator, diversity activity, RF level, audio level, and transmitter battery status for both receivers.

Furthermore, a built-in spectrum analyzer scans across the tuning range of the receiver and displays a histogram of RF activity across the band. Areas of little or no RF activity are easily recognizable. The two internal receivers can be operated separately and both have switching, antenna-combining diversity, or in tandem with ratio-diversity reception.

Finally, a variety of output adapters and mounting options are available for camera-slot operation. The receivers are powered from an external 7 to 18 VDC source. The SRC5P model provides a 5-pin connector next to the control panel with audio output from both channels in addition to the camera-slot outputs.

  • Fits camera "slots," Lectrosonics Duopack adapter and Octopack multicoupler, and operates stand-alone with various adapters
  • The SRC5P model provides a 5-pin connector next to the control panel with audio output from both channels in addition to the camera slot outputs
  • Dual-receiver design for two channels with phase-switched diversity or single channel with ratio diversity operation
  • Digital Hybrid Wireless with compatibility modes for use with other transmitters
  • Tracking front-end filters for high performance in tough RF environments
  • LCD with RF spectrum scanning
  • SmartSquelch DSP-controlled, noise based filtering and squelch
  • DSP-based pilot tone for squelch control
  • IR sync port for quick transmitter setup (LMb, LT, HHa, HMa, & SSM)
  • SmartTune operation for quick and confident frequency selection
Operating Frequencies B1: 537.600 to 614.375 MHz
Frequency Selection Steps Selectable; 100 or 25 kHz
Type of Receiver Dual conversion, superheterodyne
IF Frequency Ch.1: 248.450 MHz and 350.000 kHz
Ch.2: 243.950 MHz and 250.000 kHz
Frequency Stability ±0.001 %
Front End Bandwidth 20 MHz @ -3 dB
Sensitivity 20 dB SINAD: 1.0 uV (-107 dBm), A weighted
60 dB Quieting: 2.2 uV (-100 dBm), A weighted
Squelch Quieting Greater than 100 dB typical
AM Rejection Greater than 60 dB, 4 uV to 1 V
Modulation Acceptance 85 kHz
Image and Spurious Rejection 85 dB
Third Order Intercept 0 dBm
Diversity Method SmartDiversity phased antenna combining or Ratio Diversity using both receivers for a single audio channel
FM Detector Digital Pulse Counting Detector operating at 250 and 350 kHz
RF Spectrum Analyzer Coarse and fine scanning modes for RF spectrum site survey
Antenna Inputs 50 Ohms SMA female connectors
Audio Output Connectors Interchangeable D connector adapters for camera slot interfaces Dual TA3 male (mini XLR) balanced output adapter Balanced output adapter with fixed cables Front-panel TA5M with two balanced outputs (5P version)
Audio Output Level Adjustable -50 to +5 dBu in 1 dB steps; unbalanced output is 6 dB lower
Audio Channel Crosstalk -80 dB or better
Front Panel Controls and Indicators Sealed panel with membrane switches LCD monitors pilot tone; antenna phase, receiver battery level; transmitter battery status; audio level, RF level
Audio Test Tone 1 kHz, -50 dBu to +5 dBu output (bal); 1% THD
Transmitter Battery Type Selection 9 V alkaline, 9 V lithium, AA alkaline, AA lithium, NiMH
Phase Invert Audio-output phase normal or inverted
Compatibility Modes HYB native Digital Hybrid mode
M.3 non-Lectrosonics (call factory)
200 Lectrosonics 200 SeriesM.3 non-Lectrosonics (call factory)
100 Lectrosonics 100 SeriesM.3 non-Lectrosonics (call factory)
HYB/TB Digital Hybrid w/ Talkback
M.7 non-Lectrosonics (call factory)
M.6 non-Lectrosonics (call factory)
IFB Lectrosonics IFB
SmartNR (Noise Reduction) Off, Norman, Full modes (available in Digital Hybrid mode only)
Frequency Response 32 Hz to 20 kHz (+/- 1 dB)
THD 0.15% (system) typical in Digital Hybrid mode
Input Dynamic Range 125 dB (with full Tx limiting)
Rear Panel Controls Audio-output connectors
External DC input
Powering and Current Consumption Min. 7 V to max. 18 VDC; 2.2 W
125 mA at 18 VDC
180 mA at 12 VDC125 mA at 18 VDC
295 mA at 7 VDC
Runtime with SRBATTSLED Adapter 7.2 V, 2200 mAh "L" style battery will typically provide about 11 hours of operation
Transmitter Battery Level Tracking: LCD display with battery icon or timer readout
Operating Temperature -4 to 122°F / -20 to +50°C
Dimensions (W x H x D) 2.68 x 0.72 x 3.52" (68 x 18 x 89 mm)
Weight 7 oz (195 g)
Package Weight 1.05 lb
Box Dimensions (LxWxH) 9.8 x 7.9 x 2.9"