Lectrosonics SMV Super Miniature Wireless Microphone Transmitter (Block 941)

$1,866.00 $1,399.00
(You save $467.00)
SKU:
LEC-SMV-941
Availability:
Ships from manufacturer
Shipping:
Calculated at Checkout
Manufacturer Part Number:
SMV-941
reverb_sync:
off
  • Lectrosonics SMV Super Miniature Wireless Microphone Transmitter (Freq Block 941)
  • Lectrosonics SMV Super Miniature Wireless Microphone Transmitter (Freq Block 941)
  • Lectrosonics SMV Super Miniature Wireless Microphone Transmitter (Freq Block 941)
  • Lectrosonics SMV Super Miniature Wireless Microphone Transmitter (Freq Block 941)

What's in the Box

  • Lectrosonics SMV Super Miniature Wireless Microphone Transmitter (Freq Block 941)
  • Antenna
  • Mic Connector Kit
  • 2 x Foam Insulating Pads
  • Belt Clip
  • Carrying Pouch
  • Limited 1-Year Warranty

The Lectrosonics SMV Super Miniature Wireless Microphone Transmitter incorporates Lectrosonics patented Digital Hybrid Wireless technology, in a package no bigger than a pager. The SMV transmitter is miniature in size yet rugged enough to withstand rigorous daily use in the field or in studios.

To meet the demand for both extended operating range and extended battery life, the SMV transmitters offer selectable output power of 50, 100 mW. A third selection at 50 mW is provided for some theatrical applications, where the system design specifies lower transmitter power. The SMV transmitter offers 695 user-selectable UHF frequencies. The Switchcraft TA5M audio input has user-calibrated 44 dB gain range, and accepts electret lavaliere mics, dynamic mics, or line level signals. A DSP-controlled analog audio limiter is employed before the A-D converter. The limiter has a range of more than 30 dB and a dual-release envelope, making the limiter transparent while maintaining low distortion.

Lectrosonics patented Digital Hybrid technology revolutionizes wireless microphone transmission. Digital audio signal is converted and encoded for analog transmission, then decoded and converted back to digital audio at the receiver. The result is an exceptionally low noise floor as the compandor circuit is eliminated and clear audio reception is retained at greater distances.

The non-corrosive, machined aluminum casing is splash proof and features an LCD display with membrane switch control panel. The transmitter is powered by one AA lithium, NiMH or alkaline battery for up to 7.25 hours (lithium). The SMV transmitter is completely compatible with all Lectrosonics Digital Hybrid wireless receivers, as well as older Lectrosonics analog receivers.

Variable, Selectable Output Power
The SMV features selectable 50, 100 mW output power.
Miniature Design
The miniature design allows for a variety of mounting possibilities in film, video, theater, performances, etc.
Digital Hybrid Wireless Architecture
Lectrosonics incorporates digital and analog audio technology to enhance range and eliminate the noise associated with compandor circuits.
Locking TA5-Male Connection
A locking TA5M input is compatible with Lectrosonics and third-party microphones and cables. The input accepts line and microphone level signal.
Backwards Compatibility
The SMV transmitter is completely compatible with all current Lectrosonics Digital Hybrid receivers and older Lectrosonics analog receiver models as well.
Splash-Proof Enclosure
The polished aluminum enclosure is moisture proof and ideal for use in rain.
Extended Battery Life
The SMV transmitter is powered by one AA alkaline, NiMH or lithium rechargeable battery. With Lithium power, the unit is capable of up to 7.25 hours of use.
Frequency Range 695 frequencies in 25 kHz steps
Operating Frequencies 941: 941.525 to 959.825 MHz
Channel Spacing Either 100 or 25 kHz
Frequency Selection Control panel mounted membrane switches
RF Power Output Switchable; 50, 100 mW
Compatibility Modes Digital Hybrid Wireless® (400 Series), 200 Series, 100 Series, Mode 3 , Mode 6, IFB
Pilot Tone 25 to 32 kHz; 5 kHz deviation (in 400 Series Mode)
Frequency Stability ± 0.002%
Deviation ± 75 kHz max. (in 400 Series Mode)
Spurious Emission 60 dB below carrier
Equivalent Input Noise -125 dBV, A-weighted
Input Level If set for dynamic mic: 0.5 mV to 50 mV before limiting; greater than 1 V with limiting If set for electret lavaliere mic: 1.7 uA to 170 uA before limiting; greater than 5000 uA (5 mA) with limiting
Line level input: 17 mV to 1.7 V before limiting; greater than 50 V with limiting
Input Impedance Dynamic mic: 300 Ohms Electret lavaliere: input is virtual ground with servo adjusted constant current bias Line level: 2.7 k Ohms
Limiter DSP Controlled Soft limiter, 30 dB range
Bias Voltage(s) Fixed 5 V at up to 5 mA; selectable 2 V or 4 V servo bias for any electret lavaliere
Gain Range 44 dB; panel mounted membrane switches
Modulation Dual bicolor LEDs indicate modulation of -20, -10, 0, +10 dB referenced to full modulation
Controls Control panel with LCD and four membrane switches
Low Frequency Roll-Off Adjustable from 35 to 150 Hz
Audio Frequency Response 35 Hz to 20 kHz, +/-1 dB
Signal to Noise Ratio SmartNR Off:
No Limiting: 103.5 dB
Limiting: 108 dB
SmartNR Normal:
No Limiting: 107 dB
Limiting: 111.5 dB
SmartNR Full:
108.5 dB
113 dB
Total Harmonic Distortion 0.2% typical (400 Series mode)
Audio Input Jack Switchcraft 5-pin locking (TA5F)
Antenna Flexible, unbreakable steel cable
Batteries One 1.5 Volt AA lithium or rechargeable; NiMH recommended
Battery Life 50 mW:
Alkaline: 2 hrs
Lithium: 7.25 hrs
2500 MA NiMH: 5 hrs
100 mW
Alkaline: 1.5 hrs
Lithium: 5.5 hrs
2500 MA NiMH: 4 hrs
Emission Standard 180KF3E
Dimensions 2.3 x 1.8 x 0.64" / 58 x 46 x 16 mm not including microphone/lanyard
Weight 2.7 oz / 75.9 g with lithium battery
Package Weight 0.9 lb
Box Dimensions (LxWxH) 9.9 x 7.8 x 2.9"