Lectrosonics M2T IEM Digital Half-Rack Transmitter

$2,399.00
SKU:
LEC-M2T
Availability:
Ships from manufacturer
Shipping:
Calculated at Checkout
Manufacturer Part Number:
M2T
  • Lectrosonics M2T IEM Digital Half-Rack Transmitter
  • Lectrosonics M2T IEM Digital Half-Rack Transmitter
  • Lectrosonics M2T IEM Digital Half-Rack Transmitter
  • Lectrosonics M2T IEM Digital Half-Rack Transmitter
  • Lectrosonics M2T IEM Digital Half-Rack Transmitter
  • Lectrosonics M2T IEM Digital Half-Rack Transmitter

What's in the Box

  • Lectrosonics M2T IEM Digital Half-Rack Transmitter with Dante (470 to 608 MHz)
  • Limited 1-Year Warranty

The M2T IEM Digital Half-Rack Transmitter with Dante from Lectrosonics features transmission power up to 50 mW for extended operating range and locking XLR/TRS combo connectors, that facilitate up to four channels of analog audio sources. The Dante connection is equipped with two RJ45 connectors, four audio RX channels, and is internally routable. With ultra-low latency, 24-bit audio, and two stereo-digital channels, the M2T is an IEM transmitter for professional broadcast applications.

Built with a USB port for firmware updates and an IR port for fast setups, the M2T transmitter has a large, high-resolution backlit color LCD with large membrane switches for an intuitive interface visible in daylight or dimly-lit conditions. Analog signals are converted to an internal 24-bit digital format that is encoded, organized into packets, and passed to an RF modulator. The RF signal is filtered before and after amplification to suppress out-of-band noise and spurious signals.

Additionally, the M2T transmitter employs a technology that provides a frequency response from 20 Hz to 15 kHz with maximum channel separation. This digital audio technology eliminates a compandor and the associated artifacts, resulting in crystal clear sound, rock-solid stereo imaging, and low distortion.

RF Power Output 2 x RF carriers, 2 audio channels each
10, 25, or 50 mW; adjustable
Antenna Output 2 x BNC sockets
Operating Frequencies 470 to 608 MHz
Frequency Selection Steps 25 kHz
Frequency Stability ± 0.002%
Modulation 8 PSK
Emission Designator 200KG7E
Spurious Radiation Compliant with ETSI EN 300 422-1
Equivalent Input Noise -128 dBV
Audio Frequency Response 20 Hz to 15 kHz
Audio Input -10 dBV or +4 dBu settings with ±5 dB trim
Audio Input Jack 4 x combo XLR/TRS connectors
Dante Connection 2 x RJ45, 4 audio channels
Ethernet Connector RJ45
USB Micro USB on front panel for firmware updates
IRDA IR transceiver for sync of receivers
Input Impedance Line: 2 kOhms
Headphone Jack 1/8" / 3.5 mm stereo
Power Requirements 9 to 18 VDC
Power Consumption 5 W
Dimensions (H x W x D) 1.8 x 8.4 x 7.8" / 4.4 x 21.3 x 19.7 cm
Weight Not specified by manufacturer
Package Weight 5.8 lb
Box Dimensions (LxWxH) 16.7 x 12.4 x 5.3"