Benro BV10 Video Tripod Kit 64.4"

$899.00
SKU:
BEN-BV10
UPC:
6931747352517
Availability:
Ships from manufacturer within 3-7 days
Shipping:
Calculated at Checkout
Manufacturer Part Number:
BV10
reverb_sync:
off
  • Benro BV10 Video Tripod Kit  64.4"
  • Benro BV10 Video Tripod Kit  64.4"
  • Benro BV10 Video Tripod Kit  64.4"
  • Benro BV10 Video Tripod Kit  64.4"

What's in the Box

  • Benro BV10 Twin Leg Aluminum Tripod Kit
  • QR13 Quick Release Plate
  • BS02 Pan Bar Handle
  • ML08 Mid-Level Spreader for H-Series Twin Leg Tripods
  • 3 x SP02 Rubber Pivot Foot for H-Series Twin Leg Tripods
  • Carry Case
  • Strap
  • Limited 3-Year Warranty (Extendable to 5-Year with Online Product Registration)

The Benro BV10 Twin Leg Aluminum Tripod Kit is a complete tripod system ideal for studio applications and handling larger, fully rigged cameras weighing up to 22 pounds. The kit pairs the 100mm-ball BV10 video head with a twin leg aluminum tripod. The BV10 head features a 5-step counterbalance system to dial in the correct amount for your set-up, and independent 4-step pan and tilt drag settings for precise control over camera movements. A Manfrotto 501/504PL compatible sliding quick-release plate is provided. All of the main controls, other than counterbalance, are located on the left side of the head making it easy to make adjustments with a single hand while operating the camera. For added versatility, the 100mm-ball tiedown stud is removable to convert the head to a flat base for use on a slider or other support device.

The 2-stage, 3-section twin leg aluminum tripod incorporates a 100mm bowl and offers sturdy support for the BV10 head. It features oversized quick positive leg locks for simple and fast setup, an adjustable/removable mid-level spreader, and dual spike feet with removable rubber pads. The tripod system extends to a maximum height of 64.4", while getting as low as 29". A carry case and shoulder strap are included.

Head

  • Supports up to 22 lb
  • Removable tiedown stud to convert to flat base head
  • 5-step (0 to 4) counterbalance
  • Independent 4-step (0 to 3) pan and tilt drag
  • -65° to +90° tilt range
  • Manfrotto 501/504PL compatible sliding plate
  • Two 3/8"-16 accessory threads for mounting accessories, such as monitor or recorder
  • Bubble level

    Legs

  • Twin leg aluminum tripod with 100mm bowl fitting
  • 29 to 64.4" height range (with head attached)
  • Oversized twist lever leg locks
  • Adjustable/removable mid-level spreader
  • Dual spiked feet with removable rubber pads
  • Head

    Load Capacity:22 lb (10 kg)
    Head Mount:100 mm bowl
    Counterbalance:5-step (0 to 4)
    Pan Drag:4-step (0 to 3) fluid cartridge
    Tilt Drag:4-step (0 to 3) fluid cartridge
    Panning Range:360°
    Tilt Range:-65° to +90°
    Quick Release Plate:QR13 (Manfrotto 501/504PL compatible)
    1/4"-20 and 3/8"-16 cameras screws
    Accessory Mounting Threads:2 x 3/8"-16

    Legs

    Material:Aluminum
    Stages:2
    Sections:3

    General

    Minimum Height:29" (73.6 cm)
    Maximum Height:64.4" (163.5 cm), at 24° leg angle with column extended
    Folded Length:34.6" (88 cm)
    Weight:16 lb (7.3 kg)