Benro A373FBS7 Aluminum Tripod, S HEAD 63.2"

$419.95
SKU:
BEN-A373FBS7
UPC:
6931747366064
Availability:
Ships from manufacturer
Shipping:
Calculated at Checkout
Manufacturer Part Number:
A373FBS7
reverb_sync:
off
  • Benro A373FBS7 Aluminum Tripod, S HEAD 63.2"
  • Benro A373FBS7 Aluminum Tripod, S HEAD 63.2"
  • Benro A373FBS7 Aluminum Tripod, S HEAD 63.2"
  • Benro A373FBS7 Aluminum Tripod, S HEAD 63.2"
  • Benro A373FBS7 Aluminum Tripod, S HEAD 63.2"
  • Benro A373FBS7 Aluminum Tripod, S HEAD 63.2"
  • Benro A373FBS7 Aluminum Tripod, S HEAD 63.2"
  • Benro A373FBS7 Aluminum Tripod, S HEAD 63.2"
  • Benro A373FBS7 Aluminum Tripod, S HEAD 63.2"
  • Benro A373FBS7 Aluminum Tripod, S HEAD 63.2"
  • Benro A373FBS7 Aluminum Tripod, S HEAD 63.2"
  • Benro A373FBS7 Aluminum Tripod, S HEAD 63.2"

What's in the Box

  • Benro S7 Video Tripod Kit with A373F Aluminum Legs
  • A373F Aluminum Tripod
  • S7 Video Head
  • 75mm Half Ball Adapter
  • 3 x Spiked Feet
  • Carrying Case
  • Limited 3-Year Warranty (Extendable to 5-Year with Online Product Registration)

The Benro S7 Tripod Kit with A373F Aluminum Legs is designed to support camera rigs weighing up to 15.4 pounds. The kit pairs the S7 Video Head with the 2-stage, 3-section A373F Series 3 aluminum tripod. The head attaches to the tripod using a 75mm bowl adapter features a 75mm half ball adapter, which can be removed attaching directly to tripods, monopods, sliders, and other camera support equipment with a 3/8"-16 threaded stud. The system has a maximum height of 63.18", a minimum height of 11.6", and weighs 8.5 pounds. A carrying case is included for convenient transport and storage.

The head features a 4-step counterbalance system to help you counter the weight of your camera or heavy lens, and continuous pan drag adjustment, so you can dial in the right amount of tension for each shot. The pan and tilt locks operate independently of each other and are located on the operator side of the head for easy access and control. The head has tilt range of -50° to +90°. Your camera attaches to the S7 head via an included Manfrotto 501/504PL compatible sliding quick-release plate. Also included is an adjustable length pan bar handle, which can be mounted on either side of the head. Additional features include an illuminated bubble level and two 3/8"-16 threads for attaching optional accessories such as a monitor or recorder.

The A3573F Series 3 aluminum tripod legs features a 2-stage design, with three sections that are secured using flip-lock levers. The legs feature a spreader-less design with three discreet stops for locking them at different degrees of spread. In addition, they can be opened fully for low-angle shooting. For a secure grip on virtually any surface, the tripod has screw-in rubber feet can be easily swapped out with included spiked feet.

Head

  • Supports up to 15.4 lb
  • 65mm flat base with 3/8"-16 thread
  • 75mm half ball
  • 4-step (0-3) counterbalance: 0 lb, 5.0 lb, 10 lb, 15.4 lb
  • Continuous pan drag
  • Independent pan and tilt locks
  • Tilt Range: -50°/+90°
  • Manfrotto 501/504PL compatible sliding plate
  • Two 3/8"-16 accessory threads for mounting accessories, such as monitor or recorder
  • Illuminated bubble level
  • Adjustable length pan bar
  • Legs

  • 2-stage, 3-section aluminum tripod with 75mm bowl fitting
  • Flip lock levers
  • Three leg angles
  • Screw-in rubber and spiked feet
  • Max height: 63.18" (with S7 head attached)
  • Min height: 11.6" (with S7 head attached)
  • System

    Load Capacity:15.4 lb (7 kg)
    Maximum Height:63.18 in (160.5 cm)
    Minimum Height:11.6" (29.5 cm)
    Weight:8.5 lb (3.87 kg)

    Head

    Load Capacity:15.4 lb (7 kg)
    Head to Tripod Mounting Thread:3/8"-16 thread (75mm half ball adapter included)
    Counterbalance Steps:4-step: 0 lb (0 kg), 5.0 lb (2.2 kg), 10 lb (4.5 kg), 15.4 lb (7 kg)
    Pan Drag:Continuous
    Tilt Drag:4-step (0 to 3) fluid cartridge
    Panning Range:360°
    Tilt Range:-50° to +90°
    Quick Release Plate:QR6 (Manfrotto 501/504PL compatible)
    1/4"-20 and 3/8"-16 cameras screws;
    Accessory Mounting Threads:2 x 3/8"-16
    Leveling Bubble/Illuminated:Yes / Yes
    Height:4.72" (12 cm)
    Weight:3.2 lb (1.4 kg)

    Legs

    Material:Aluminum
    Bowl Diameter:75mm
    Leg Stages/Sections:2/3
    Leg Lock Type:Flip lock