Behringer B1/B Single-Diaphragm Studio Condenser Microphone

$149.99 $99.99
(You save $50.00)
SKU:
BEH-B1/B
UPC:
705105160184
Availability:
Ships from manufacturer
Shipping:
Calculated at Checkout
Manufacturer Part Number:
B1/B
reverb_sync:
off
  • Behringer B1/B Single-Diaphragm Studio Condenser Microphone
  • Behringer B1/B Single-Diaphragm Studio Condenser Microphone
  • Behringer B1/B Single-Diaphragm Studio Condenser Microphone
  • Behringer B1/B Single-Diaphragm Studio Condenser Microphone

What's in the Box

  • Behringer B-1 - Single Diaphragm Studio Condenser Microphone
  • Shockmount
  • Carrying Case
  • Windscreen
  • Limited 1-Year Warranty

The B-1 Gold-Sputtered Large-Diaphragm Studio Condenser Microphone from Behringer features a large diaphragm condenser design and can be used for project and professional studio applications. It offers a pressure gradient capsule that delivers a transparent 20 Hz to 20 kHz frequency response while handling an SPL rating of 138 dB (148 dB with pad), resulting in clean transparent audio at transient peak levels. The B-1 features a cardioid polar pattern, minimizing off-axis audio and noise caused by room ambiance and additional instruments. A -10 dB pad switch provides headroom when recording loud signals that can distort on input, and a low-frequency roll-off switch minimizes low-end noise at 75 Hz (6 dB / Octave). The microphone includes a shockmount, windscreen, and carrying case.

cardioid Polar Pattern

The B-1 features a cardioid polar pattern, minimizing off-axis signal and noise caused by room ambiance, monitors, noise, and additional instruments.

High-Pass Filter Switch

A high-pass filter switch eliminates low frequencies at 75 Hz (6 dB / Octave). This is useful when ambient hum or line noise is prevalent.

-10 dB Pad Switch

The B-1 is capable of handling Sound Pressure Levels of up to 135 dB and a -10 dB pad switch allows for a total of 148 dB of headroom.

Analog Performance

Operating Principle:Pressure Gradient
Transducer:Condenser
Diaphragm:1.0"/25.40 mm
Polar Pattern:Cardioid
Frequency Range:20 Hz to 20 kHz
Signal to Noise Ratio:81 dB A-Weighted
Equivalent Noise Level:13 dB A-Weighted
Maximum SPL:138 dB SPL
Pad:10 dB
THD:1%
Impedance:50 Ohms
Load Impedance:1000 Ohms
Sensitivity:20 mV/Pa
Low-Cut Filter:6 dB/Octave @ 75 Hz

General

Output Connectors:1 x 2-Pin XLR
Operating Current Consumption:3.0 μA
Length:6.85" / 174.0 mm
Diameter:2.28" / 58.0 mm
Weight:1.02 lb / 0.461 kg

Packaging Info

Package Weight:4.9 lb
Box Dimensions (LxWxH):13.2 x 9.6 x 4.5"