Audio Technica AT4050ST Side-address stereo condenser microphone

$1,299.00
SKU:
AUT-AT4050ST
UPC:
4961310137779
Availability:
Ships from manufacturer within 3-7 days
Shipping:
Calculated at Checkout
Manufacturer Part Number:
AT4050ST
reverb_sync:
off
  • Audio-Technica AT4050ST Side-address stereo condenser microphone
  • Audio-Technica AT4050ST Side-address stereo condenser microphone
  • Audio-Technica AT4050ST Side-address stereo condenser microphone
  • Audio-Technica AT4050ST Side-address stereo condenser microphone
  • Audio-Technica AT4050ST Side-address stereo condenser microphone
  • Audio-Technica AT4050ST Side-address stereo condenser microphone
  • Audio-Technica AT4050ST Side-address stereo condenser microphone
  • Audio-Technica AT4050ST Side-address stereo condenser microphone
  • Audio-Technica AT4050ST Side-address stereo condenser microphone
  • Audio-Technica AT4050ST Side-address stereo condenser microphone

What's in the Box

  • Audio-Technica AT4050ST Stereo Condenser Microphone
  • XLR Cable
  • Shock Mount
  • Dust Cover
  • Protective Case
  • Lifetime Warranty

The AT4050ST from Audio-Technica is a studio-grade side-address stereo microphone that offers terrific flexibility for a variety of applications. The mic housing contains independent cardioid and figure-8 condenser elements, which allows the mic to maintain precise pattern definition across a full frequency range. It also allows you to choose between a left-right stereo output or discrete mid-side signal.

The diaphragms are vapor-deposited with 2-micron thick gold, and undergo a 5-step aging process to ensure years of optimal use. Internal transformerless circuitry helps to eliminate low-frequency distortion and provides excellent correlation of high-speed transients. The housing has a symmetrical design that provides an open acoustical environment to minimize internal reflections.

For additional flexibility, the mic has an 80Hz high-pass filter to reduce low-frequency rumble and hum, as well as a 10dB pad switch, which provides extra headroom when recording loud sound sources. The AT4050ST comes complete with a custom shock mount, an extra-long XLR cable, a dust cover, and a protective carrying case. The mic is also certified by the METAlliance.

  • Independent cardioid and figure-8 condenser elements allow the mic to maintain precise pattern definition across a full frequency range
  • Selectable left-right stereo output or discrete mid-side signal output
  • Diaphragms are vapor-deposited with 2-micron thick gold, and undergo a 5-step aging process to ensure years of optimal use
  • Internal transformerless circuitry helps to eliminate low-frequency distortion and provides excellent correlation of high-speed transients
  • Symmetrical housing design provides an open acoustical environment to minimize internal reflections
  • Switchable 80Hz high-pass filter reduces low-frequency rumble and hum
  • 10dB pad switch provides extra headroom when recording loud sound sources
  • Includes a custom shock mount, an extra-long 8-conductor shielded XLR cable, a dust cover, and a protective carrying case
  • Certified by the METAlliance
  • Transducer:Externally-Polarized (DC Bias) Condenser
    Polar Pattern:Cardioid and Figure-8
    Frequency Response:20 Hz to 18 kHz
    Dynamic Range (Typical):Mid: 134dB (1kHz at Max SPL)
    Side: 132dB (1kHz at Max SPL)
    Signal-to-Noise Ratio:Stereo 90°: 69dB (1kHz at 1Pa)
    Stereo 127°: 78dB (1kHz at 1Pa)
    Mid: 79dB (1kHz at 1Pa)
    Side: 77dB (1kHz at 1 Pa)
    Maximum Input Sound Level:Mid and Side: 149dB SPL (1kHz at 1% THD)
    159dB SPL (With 10dB Pad, Nominal)
    Power Requirements:48V Phantom Power, 6.4mA
    Output Impedance:50 Ohms
    Output Connectors:5-Pin XLR Male
    Pad:Yes, 10dB
    Low Frequency Roll-Off:Yes, 80Hz @ 12dB/Oct/td>
    Dimensions (LxDiameter):7.6 x 2.1" (193 x 53mm)r
    Weight:18.2 oz (517g)

    Packaging Info

    Package Weight:3.7 lb
    Box Dimensions (LxWxH):11.0 x 10.0 x 4.0"