Audio Technica AT2041SP 20 Series Studio Pack; AT2020 & AT2021

$169.00
SKU:
AUT-AT2041SP
UPC:
042005140039
Availability:
Ships from manufacturer within 3-7 days
Shipping:
Calculated at Checkout
Manufacturer Part Number:
AT2041SP
reverb_sync:
off
  • Audio-Technica AT2041SP 20 Series Studio Pack; AT2020 & AT2021 cardioid condenser microphones with stand mount, stand clamp and protective pouches
  • Audio-Technica AT2041SP 20 Series Studio Pack; AT2020 & AT2021 cardioid condenser microphones with stand mount, stand clamp and protective pouches
  • Audio-Technica AT2041SP 20 Series Studio Pack; AT2020 & AT2021 cardioid condenser microphones with stand mount, stand clamp and protective pouches
  • Audio-Technica AT2041SP 20 Series Studio Pack; AT2020 & AT2021 cardioid condenser microphones with stand mount, stand clamp and protective pouches

What's in the Box

  • Audio-Technica AT2041SP Cardioid Condenser Studio Microphone Package
  • Pivoting Mount for AT2020
  • Stand Clamp for AT2021
  • 2 x Protective Carrying Pouches

The Audio-Technica AT2041SP is a recording microphone package configured to suite any recording budget. The package consists of the AT2020 cardioid condenser microphone and AT2021 small-diaphragm condenser recording microphone.

The combination of the two microphones provide the flexibility to accurately record vocals and instruments in project and home recording studios. The microphones exhibit a wide frequency response and cardioid polar patterns for accurate detail and minimal residual noise.

AT2020 Studio Condenser

The AT2020 is a side address large diaphragm condenser that's well suited for vocal capturing.

AT2021 Small-Diaphragm Condenser

The AT2021 small diaphragm condenser microphone captures instruments in rich detail and minimal noise.

Professional Mounting

The AT2020 includes a pivoting, threaded stand mount while the AT2021 includes a professional stand clamp.

Transducer:Fixed-charge back plate, permanently polarized condenser
Polar Pattern:Cardioid
Frequency Response:AT2021: 30Hz to 20kHz
AT2020: 20Hz to 20kHz
Dynamic Range(Typical):AT2021: 126dB SPL, 1kHz @ Max SPL
AT2020: 142dB, 1 kHz @ Max SPL
Signal-to-Noise Ratio:AT2021: 75dB, 1 kHz @ 1 Pa
AT2020: 74dB, 1 kHz @ 1 Pa
Maximum Input Sound Level:AT2021: 145dB SPL, 1 kHz @ 1% T.H.D.
AT2020: 144dB SPL, 1 kHz @ 1% T.H.D.
Power Requirements:48V DC, 2mA typical
Output Impedance:48V Phantom Power
Output Connectors:3-pin XLR-male
Pad:No
Low Frequency Roll-Off:No
Dimensions:AT2021: 4 x .83" (101.5 x 21mm) (Length x Diameter)
AT2020: 6.38 x 2.05" (162 x 52mm) (Length x Diameter)
Weight:AT2021: 2.9 oz (83 g)
AT2020: 12.1 oz (345 g)

Packaging Info

Package Weight:2.35 lb
Box Dimensions (LxWxH):9.8 x 9.5 x 3.0"