Audio Technica AE5100 Large-diaphragm end-address cardioid condenser instrument microphone

$279.00
SKU:
AUT-AE5100
UPC:
042005128143
Availability:
Ships from manufacturer within 3-7 days
Shipping:
Calculated at Checkout
Manufacturer Part Number:
AE5100
reverb_sync:
off
  • Audio-Technica Large-diaphragm end-address cardioid condenser instrument microphone
  • Audio-Technica Large-diaphragm end-address cardioid condenser instrument microphone
  • Audio-Technica Large-diaphragm end-address cardioid condenser instrument microphone
  • Audio-Technica Large-diaphragm end-address cardioid condenser instrument microphone
  • Audio-Technica Large-diaphragm end-address cardioid condenser instrument microphone
  • Audio-Technica Large-diaphragm end-address cardioid condenser instrument microphone

What's in the Box

  • Audio-Technica AE-5100 - Large-Diaphragm Cardioid Instrument Microphone/li>
  • AT8471 Isolation Clamp/li>
  • 3/8"-16 Threaded Adapter/li>
  • AT8136 Foam Windscreen/li>
  • Protective Pouch
  • Limited 5-Year Warranty

The Audio-Technica AE5100 is a large diaphragm condenser microphone designed for capturing instruments. The sensitivity and frequency response make it suitable for overheads, percussion and acoustic instruments such as guitar and strings. The large diaphragm element delivers natural, transparent signal reproduction and withstands high transients without distortion and noise. The sleek low-profile design allows flexible microphone placement options. A high pass filter switch eliminates noise below 80Hz and a 10dB provides additional headroom when capturing excessively loud signal sources. The AE5100 is powered via external 11V to 52V phantom power source.

High SPL Response

The AE-3000 excels in reproducing signals with high SPL response. Guitar cabinets, drums and percussion are all accurately reproduced without noise and distortion.

Cardioid Polar Pattern

The cardioid polar pattern effectively minimizes noise and ambiance at the off-axis sections of the microphone.

High Pass Filter

A high pass filter switch eliminates low frequency noise and rumble below 80Hz.

10dB Pad

A 10dB pad switch increases headroom when capturing excessively loud signal sources.

Low-Profile Design

TThe sleek low-profile design allows flexible microphone placement options.

Transducer:Condenser
Polar Pattern:Cardioid
Frequency Response:20Hz to 20kHz
Dynamic Range (Typical):137dB, 1kHz @ Max. SPL
Signal-to-Noise Ratio:83 dB, 1 kHz at 1 Pa
Maximum Input Sound Level:148 dB SPL, 1 kHz at 1% T.H.D.
Power Requirements:11-52V, 3.2 mA typical
Output Impedance:150 ohms
Output Connectors:3-pin XLR male-type
Pad:10 dB pad
Low Frequency Roll-Off:80 Hz, 12 dB per octave
Dimensions:5.85 x 1.02" (148.5 x 26mm) (Length x Diameter)
Weight:5.0 oz (143 g)

Packaging Info

Package Weight:1.0 lb
Box Dimensions (LxWxH):9.5 x 5.0 x 2.9"