Audio Technica AE3000 Large-diaphragm side-address cardioid condenser instrument microphone

$279.00
SKU:
AUT-AE3000
UPC:
042005128006
Availability:
Ships from manufacturer within 3-7 days
Shipping:
Calculated at Checkout
Manufacturer Part Number:
AE3000
reverb_sync:
off
  • Audio-Technica Large-diaphragm side-address cardioid condenser instrument microphone
  • Audio-Technica Large-diaphragm side-address cardioid condenser instrument microphone
  • Audio-Technica Large-diaphragm side-address cardioid condenser instrument microphone
  • Audio-Technica Large-diaphragm side-address cardioid condenser instrument microphone
  • Audio-Technica Large-diaphragm side-address cardioid condenser instrument microphone
  • Audio-Technica Large-diaphragm side-address cardioid condenser instrument microphone

What's in the Box

  • Audio-Technica AE-3000 - Large-Diaphragm Cardioid Instrument Microphone
  • AT8471 Isolation Clamp for 5/8"-27 Threaded Stands
  • 5/8"-27 to 3/8"-16 Threaded Adapter
  • Protective Pouch
  • Limited 5-Year Warranty

The AE3000 Cardioid Condenser Instrument Microphone from Audio-Technica is a large diaphragm side-address microphone designed for capturing instruments rich in transient response. Guitar cabinets, drums and percussion signals are accurately reproduced without noise and distortion. The capsule features a cardioid polar pattern which effectively minimizes noise at the off-axis sections of the capsule, providing high gain-before-feedback response and minimal ambient noise. A high pass filter switch eliminates noise below 80 Hz and a 10 dB pad increases headroom when capturing signals at close proximity or at high levels. The microphone is powered by an external 11 to 52V phantom power source.

  • Suitable for high-SPL applications
  • The large-diaphragm capsule combines with the open architecture of the headcase to provide an accurate and open sound
  • Low-profile side-address design with a tapered grille allows for optimal positioning of the element in conjunction with your sound source
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Durable design for dependability on the road
  • Integral 80 Hz HPF switch and 10 dB pad
  • Transducer:Condenser
    Polar Pattern:Cardioid
    Frequency Response:
    Signal-to-Noise Ratio:83 dB
    Equivalent Noise Ratio:11 dB
    Maximum SPL:148dB SPL
    Pad:10 dB
    THD:1%
    Impedance:100 Ohms
    Sensitivity:7.0 mV/Pa
    Low-Cut Filter:12 dB/Octave @ 80 Hz
    Dynamic Range:137 dB

    General

    Output Connectors:1 x 3-Pin XLR
    Operating Current Consumption:3.0 μA
    Operating Voltage:11 to 52 V
    Length:4.55" / 115.5 mm
    Diameter:1.89" / 48.0 mm
    Weight:6.0 oz / 170 g

    Packaging Info

    Package Weight:1.0 lb
    Box Dimensions (LxWxH):9.5 x 5.0 x 2.9"